| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | Tranny Probs, please help!!! | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=30412 |
30412, Tranny Probs, please help!!!
Posted by Lo RS 4Me, Aug-18-02 07:00 AM
ok guys, my trannys fine when driving normal, but when i'm racing or shifting fast 2nd and 3rd will grind bad, sometimes not even going in quickly, it's loud and it's a pain and it slows me down, my syncros have been replaced because thats what they thought it was, the rings, seals and bearings were replaced. My dad knows alot about cars and he's asked around about the problem, he thinks is is the hydrolic clutch slave cylinder, anyone ever had this problem ? help me please asap, i need advice before i buy a slave cylinder!!!!!
|
30413, RE: Tranny Probs, please help!!!
Posted by Twiste, Aug-18-02 07:38 AM
slave cylinders arent a lot i dont think. You could just rebuild yours too i believe.
|
30414, RE: Tranny Probs, please help!!!
Posted by Lo RS 4Me, Aug-18-02 07:48 AM
so could it be causing that problem ? basically i'm wondering if anyone else has had this same problem
|
30415, RE: Tranny Probs, please help!!!
Posted by DownAzzDSM, Aug-18-02 08:42 AM
I wouldn't know what could be wrong, but I can tell you that a B&M short shifter and symborski shifter bushings would probably do wonders for that problem. I used to grind third while racing but not anymore...:thumbsup
|
30416, RE: Tranny Probs, please help!!!
Posted by Lord_Khan, Aug-19-02 03:43 AM
My car has this problem. I asked about it a while back, and got the same answer that you already tried which was that my synchros may be acting up. I'm glad I've not replaced them YET after reading your post. I honestly am starting to thing it's the slave, or master cylinder as well. A coworker of mine with an Integra had the EXACT same problem, and it was is Master Cylinder. I replaced my tranny fluid (I was at 70k miles, so it was looong overdue), and got a short shifter, and it worked A LOT better, but I still notice it sometimes won't go into 2nd gear at high rpms when trying to race. Try the master cylinder(sp) since it's fairly cheap. Another coworker of mine had his replaced on his 96 GSX (before he sold it) when the cylinder went up, and it was about $130.
|
30417, RE: Tranny Probs, please help!!!
Posted by Lo RS 4Me, Aug-19-02 07:08 PM
ok guys, any others ? its gettin worse, harder to put every gear in, when i'm on the interstate and i downshift from 5th to 4th it takes forever to get it in there . . what's going on = < my clutch feels very very lymp like it's not even pushing anything, doesn't it sound like the master or slave cylinder? maybe i'm leaking clutch fluid or somethin[br />
| |