Someone wrote a good how to install the polyurethane rear motor mount inserts. I tried searching on here to find the post with the link but cant find it. Can someone post the link for me please?

Thanks,
Allen

Here ya go...
http://www.2gnt.com/cgi-bin/dcforum/dcboard.cgi?az=show_thread&om=60&forum=DCForumID36&viewmode=all

Check out my site for the write-up.

http://www.ourformerselves.com/richard/rearmotormount.htm


Thanks, Richard (97 ESi)
http://www.ourformerselves.com/richard/main.htm


BEST TRACK TIME -- 16.46 @ 86.03mph
----------------------------------------------------------
COMING MODS:
NER 1F Turbo Kit w/ Turbonetics T3/T4 S-Trim Ball Bearing Turbo || Autometer Phantom Boost, Air/Fuel Ratio, & EGT Guages || Autometer Full Pillar || HKS Type-1 Turbo Timer

CURRENT MODS:
AEM Cold Air Intake || Magnacor 8.5 Ignition Wires || NKG BKR6EVX-11 Spark Plugs || Front & Rear Strut Bars || Eibach Springs Pro-Kit || KYB AGX Adjustable Shocks/Struts || AF/X Underdrive Pulley || Pacesetter - Monza Exhaust System || OBX Racing Sports - B5 Bomb Tunable Muffler || Energy Suspension - Motor Mount Inserts || Bored Throttle Body

POINTLESS MODS:
Sylvania Cool Blue Headlights || Cobra Eyes Windshield Washer Blue LED Lights || Nokya Motorsports Sport Pedal Set

>Check out my site for the write-up.
>
>http://www.ourformerselves.com/richard/rearmotormount.htm


Thats the one I was looking for. I read it last week and was wanting to refresh my memory before actually doing it today. Well I did it on memory but it was easy enough from what I remembered. Great write up and thanks for the help. Those rear mounts were a biotch to break loose. I had to break out the impact wrench for those and it sure goes back together easier than it came apart...LOL It took 1 hour 45 minutes for me do it so it wasn't to bad.

Thanks,
Allen