When buying adjustable cam gears... what kind of HP gains can be expected? Also, how much torque am I looking at losing and also what other negative effects come from advancing or retarding the timing?

Thanks
Damien

upping for some answers....

I don't know exactly about power bands effects, but if I remember I think properly tuned you should gain like 5hp at the wheels. I was actually looking into the weigh saving advantages of them. Even unadjusted Unorhtodox advertises as being lighten and I'm pretty sure that the AEM are also lighter than stock, so there should be minimal advantages there. I think a couple people have had then on the dyno... I usually screw this up but I think the best settings on a mostly stock motor is advange intake 2 degree and retard exhaust 2 degree...

"To strive to seek to find... and not to yield."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Intake manifold 4 porting, Rear Motor Mount Ins. RRE FL Tie Bar(Well Almost), Slver Cadmium Plated KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads (Well Almost)

Mike i must admit you are one of the nt guru's. You know the run down ...knowledge is horse power ~!~!!~!!!


oRACLe
Magnacore WiReS
nGk Plugs ( watch out now )
AeM ShoRt RaM
UnOrThAdOx RaCiNg PuLLeY
NeW AuTo TrAnnY
SToCk 14" Rims ( gotta have these )
Apex-i N1 exaust
ModdEd 1G EuRo's
CuZo SideMarKers
Clear CoRnErs

Doesnt advancing your timing hurt the car?

-Nick

First of all. Thanks Oracle!!!

Second advancing you're timing can help power especially if you are using higher octane gas, which burns slower, so you start the combustions sooner but it lasts longer putting more force on the piston for a long period of time creating more power. Can you go too far with this? Yes, it's called detonation, when the main part of teh combustion is occuring when the piston is still on it's way up. You can have really nasty things happen like... oh I don't know... holes in your pistons. But done within reason and safely you add power.

"To strive to seek to find... and not to yield."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Intake manifold 4 porting, Rear Motor Mount Ins. RRE FL Tie Bar(Well Almost), Slver Cadmium Plated KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads (Well Almost)

LAST EDITED ON 05-Jun-01 AT 11:31 AM (PST)

Okay, is +2 intake -2 exhuast SAFE?

-Nick

Oh yeah. I think just about everybody here who has cam gears runs that setting. You'd have to go a lot farther to even start to see knocking. And I don't think you'd gain any power so there really isn't a point.

"To strive to seek to find... and not to yield."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Intake manifold 4 porting, Rear Motor Mount Ins. RRE FL Tie Bar(Well Almost), Slver Cadmium Plated KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads (Well Almost)

Thanks for all the help guys... just one more question though... is it true that if you replace your stock ECU with an aftermarket one (Jet, etc.), that you should leave your timing alone and not alter it because of potential dangers to your engine?

Thanks again
Damien