I have a 96 Eclipse N/T and I have a Ecu Problem.. I think?
My car starts fine and runs.. its just keeping it running for more than 30 minutes while driving. My check Engine light comes on after the car has been driven for 30 minutes or more, and about 3- 5 minutes after the check engine light comes on the car just Cuts off like its not getting any fuel and will not start until the car has cooled back down. But after it warms back up again the problem repeats. Ive taken it to the dealer a few times and they are dumbfounded. They keep telling me "Every thing that the ecu codes said was wrong with the car is working fine." Has anyone else had this problem, and if so do I have to replace my Ecu?

Had the same problem last year.... had to replace the ECU 3 times.... its an internal electrical problem, take it to an auto eletrician... Recently was having the problem again and it was the TPS sensor...
Trisha
http://communities.msn.com/AStreetRacersDream


Iceman CAI
VR4 Fuel Pump
8mm Accel plug wires (yellow)
NGK spark plugs
OBX-R Muffler
Front and Rear Strut Tower Bar
KYB AGX shocks
Ingalls Rear Camber Kit
Neuspeed Sport Springs
17" Ducati Wheels with Kumho tires (not shown)
Graphics by Extreme Designs (Houston)

Could be the same problem Trish had, could also be the coolant temp sensor.

"To strive to seek to find... and not to yield."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather Filters, AFX UDP, 55mm TB, GS-T Muffler, FU/RU/RL STBs, Front NRG Susp. Motor Mount Ins., Red Silicone Hose Kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17

And in my Room: Rear disc brake conversion kit, SS Brake Lines, Intake manifold 4 porting, Rear Motor Mount Ins. RRE FL Tie Bar(Well Almost), Slver Cadmium Plated KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads (Well Almost)