We are building crate motor short blocks. In stock stroke and 3.540 stroke 2.2 litres. Check the new section of the webpage under Neon, becuase we are still working on the sight.

Gary

Bad ass.

What about just the bottom end kit and the stroker crank? i looked earlier but didn't see it.

sounds good Gary... around how much are we looking at for shipping to souteren ca about ?also will you guys be having the head pre-built also later on if we wanted? if so how much are we looking at...
thanks dude




Michael 99gs
HRC Stage 2
http://www.dreamwater.net/purplebeast

havent lookd at the site yet, but right on...

>sounds good Gary... around how much are we looking at for
>shipping to souteren ca about ?also will you guys be having
>the head pre-built also later on if we wanted? if so how
>much are we looking at...
>thanks dude
>
>
>
>
>Michael 99gs
>HRC Stage 2
>http://www.dreamwater.net/purplebeast

Shipping is by Motor Freight. You can figure shipping at this locatiom http://www.fedexfreight.fedex.com/rate.jsp Our Zip Code is 26726, the class of the shipment is 85.0, and the weight is about 200 pounds. We get a 40% discount on the freight and we pass that onto you, so put in 40% (US Customers only) for a discount. Declare the value. I used 90210 as a CA Zip code and got $191.12 shipping charge. If you have no way to get it from the back of a semi, then check lift gate service, it cost more, but it will get your crate to the ground. Anyway check all that apply to you, and it will give you a close estimate of the rate, but make sure you tell us at the time of order you need lift gate service otherwise you will not get it.

>Bad ass.
>
>What about just the bottom end kit and the stroker crank? i
>looked earlier but didn't see it.

Until supply catches up with demand, we are only offering the short blocks. We are having trouble getting enough cranks.

What are the specs on this? How much power would I be lookin at with nothing but a stroker kit? With the crank, and whatever else I would need. Would I need any head work?

That depends on what you do. The 10% increase in displacement will give you a 10% increase in power, and the compression gives you 4% for 1 point you go over stock. The short block is built to handle up to 500 hp.

I thought the stroker kit alone was enough to be up to par or faster than GST's in stock form?

gosh, the cheapest i got was $360, but if i want they to notify me, and bring it to my house total goes up to $450 about.. just to drop the motor from the truck to the ground is $170 already, and shipping cost about $185... hmmm something i got to think about now...



Michael 99gs
HRC Stage 2
http://www.dreamwater.net/purplebeast

I can't find crate motor short block anywhere on the site. Can you post me up a link? Also, is there a refundable core charge for my stock one? Or do I just keep the stocker?

Neon products....

you also have to check the new webpage and not the old one, I had to figure that one out myself

Hey there in your section http://howell.mountain.net/sdc/howell/Talon-Elipse95-99.asp

ahhh. new site. I was all wrong. Thanks for the link.

>ahhh. new site. I was all wrong. Thanks for the link.


Keep in mind that sight changes constantly as we update it, and add stuff from the old sight. Make sure you check out both.

>Until supply catches up with demand, we are only offering
>the short blocks. We are having trouble getting enough
>cranks.

You'll still modify a crank if we send you one....right?


95 Eclipse RS : 5 speed
Gude cams : test pipe : AFX UDP : ram air : Thrush glasspack : Dual air horns : Kenwood KDC 5000 : AutoCommand remote start
incomming - lower strut bars

So how's the supply right now Gary?