http://www.ptuning.com/html/search-result.cfm?cmbPriceRange=&cmbCategory=engine&cmbSubCategory=ignwir&cmbMakeModel=eclips&cmbBrand=mag&cmbYear=1995

I want to get magnecore wires but i have a nonturbo but i have a star stage 1 turbo now but i have yet to intall it. My question is do i get turbo plugs or non turbo being i am not factory turboed ?



Auto Tranny- Full Blitz kit- Termanator wing w/led - 17'GTR Rims- M3 mirrors w/led- Custom 2.5" Exhaust- Aem CAI w/ bypass valve- G-3 Altezzas- Indiglo Gauges- Eibach sportline springs- Pacesetter Headers-
Kenwoood indash tv/dvd/dreamcast - JL Audio custom 12x3 12" sub- JL Audio 250/1 amp -MB Quart 5 1/4 fronts- Sony 6x9 backs


Remdawgz@aol.com

I honestly don't think so, cause all the rest of your engine internals are still the same, so it shouldn't make a difference. You may want to post this on the "Turbo 2GNT" board just to double check though.

If you want wires, get the non turbo version. If you want plugs get stock nonturbo or one heat range colder (brk-6e11 or brk-7e11 respectively). You can leave off the last number (11) if you want to get a smaller gap in your plug. or you can get the 11's and gap as needed.

Matt

The turbo wires won't fit the 420a; therfore, you need to get the Magnecor n/t wires. For plugs, you can either keep using the stock heat range or get a colder one.