Here is the link:

http://www.keithurbanfans.com/talon95stang.html

Tell me what you think? If anybody has a problem I can help. It is very easy to do and forget about a bored TB just get a jeep tb!

If you would like anything added you can email me at: Talon95Stang@cs.com

well i didnt read the whole thing but the first thing i noticed was that you said we should read up on the neon that did this but i have no idea were to find that. if you can post a link on there so people know where to go. other than that looks good and good job!

"Proud to be, a 2gnt" (was) :)


-mitsuman

Turbo:
1. HRC STG 2
2. Blits SS BOV

Exhaust:
1. Greddy Power Extreme

Exterior:
1. C/F hood du!!

Ride:
1. Motegi MR7 17'' wrapped
in yokohama A550v
235/45/17
2. H&R Sport Springs

Sound:
1. sony xplod cdxm620 deck
2. 2 10'' audiobahn subs
3. nice shiny audiobahn
amp

Electronics:
1. HKS TT(sitting in room)
2. Apexi S-afc(sitting in
room)
3. Corbin's A/F
guage(sitting in room)

Body:
1. Blitz front end(sitting in
room)

Fun mods:
1. "Nozzel mod"

Wanted:
1. Injectors
2. Howell rebuild kit.

Here is the link:

http://www.geocities.com/lover232/Enjoy.html

I will update the page soon.

dood u roolz! tia

If you do this modification you can get one of those throttle body spacers too, I dont know if it works but
here checkk the link http://cgi.ebay.com/ebaymotors/ws/ebayISAPI.dll?ViewItem&item=1827763582&r=0&t=0 they claim an 11hp gain, doubt it but

what type of gains did you get from this?

You can get one of those spacers, anyway. They make them for our car now. Here's a couple of links.

http://shop.store.yahoo.com/whitespitstop/helimsmalent.html

http://www.performanceimprovements.homestead.com/Helix.html

so does it idle well or is it rough?

Do you mind if i add this to the Mods section of 2GNT?

I can host it here, or keep it on your site. Whichever, let me know.

Darkone,
Put it on this site. (I will take some pics of the gasket soon) but how would I update it when its on this site?

You could get a spacer but you would probably have to move the battery to allow the intake room to go down.

This tb idles great! It took my code 25 away.

It only took like 2 hours to complete!

The TB reduces in the back so I'm going to be grinding the back of the TB and the intake manifold to get a true 60mm TB. (I will get pics as soon as I get that done as well)

Well lets just say it's got to be better than a 55mm. I've never had a 55mm but I felt the throttle response is great and a good increase in hp.

How about boring the 60MM throttle body to something bigger?

Talon95Stang you should made them and sell to people on the board.

Sounds cool. Also, sounds like something I would probably fuck up!!! :nono

I could get some made for around $250.
Or you can send me yours and it would cost $175.
(plus shipping both ways)
price includes:
-Gasket
-Intake Plug
-Complete Jeep TB w/Sensors

If any one wants one let me know?

you can email me at: Talon95Stang@cs.com

60mm is big enough. To much air is not a good thing.