I installed the 8.8mm racing wires from accel on my 95 GS and when i started the car it felt as though the car was running on only three cylinders. I checked all of the connections numerous times and everything is fine. Can a stock coil pack and ngk plugs handle these wires? Any information is appreciated. Thanks

I had the same prob, I just got a new set though, that fixed it

The wires were made by my friend, custom made. Everything is connected right. He made a set for his first gen non turbo and they work just fine. Im going to take them apart and try to figure it out. Thanks

Check the gap on your plugs.

my gap is set to .040

I think that 0.03-0.035 is the best. I heard that some people has problem with too large gap.

Ken

5zigen rearsection/Cherrybomb glasspack resonator/Apex'i
cone intake/AFX UDP/Fidanza cam gears/Power Stop cross drill rotors(front)/shunk2 coilover/Koni adjustable (front)/KYB struts(rear)Konig V-racing front bar/Enkei RSF2 17" with Kumho/ Nakayama
projectors /APC Clear tail light and interior mods

Ok today i tried adjusting the gap on the plugs from .030 to .040 and the car still has a bad misfire when i try to accelerate. Any other suggestions?

Ok, this is how I figured mine out, get ur stock wires out and put them on, now one at a time put ur accel wires on one at a time, that will tell you if on is bad, then you can fix it. I have one bad one from accel, but no one cares:(