i have a problem to wire my s-afc !!!!on the installation manual is yellow and white for the mas and on a site i read they would not in use !?! what is right who can tell me wich wire is for what! red is power , black and brown are negative and the others??????
thanks alot for a quick help

Check these pages out:

http://www.turbogs.com/vfaqs/afc_install_for_420a.htm
http://pages.prodigy.net/mkerley/safcinstall.html

And our 2.0L Chryslers don't have a MAS or MAF. We have a speed density system that is based primarily on MAP (manifold absolute pressure)

Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

Corbin, he has a 4g63 N/T over in Europe. 286, you need to put that in your signature so people remember that you are a 4g63.



________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

thanks but is there a difference in wireing 420a and 4g63 n/t?i only need to know the wires of the s-afc. the ecu wires will i find

i only wanne know: pink and orange or yellow and white!?

allright i have found the right one ... pink and orange

I had this weird feeling like I was responding to a non-420A post. I checked the original sig, but no luck. I put "2.0 Chryslers" in my post to try to cover myself. Can't take anything for granted here...


Corbin

'95 ESI-T
HRC+FMIC+ETC...



Gimme fuel...Gimme fire...Gimme that which I desire

are the diagrams the same for 97-99 than it is for 95-96? i know somebosy asked b4 but i cant find it. thnx


"Proud to be, a 2gnt" (was) :)


-mitsuman

Turbo:
1. HRC STG 2
2. Blits SS BOV

Exhaust:
1. Greddy Power Extreme

Ride:
1. Motegi MR7 17'' wrapped
in yokohama A550v
235/45/17
2. H&R Sport Springs

Sound:
1. sony xplod cdxm620 deck
2. 2 10'' audiobahn subs
3. nice shiny audiobahn
amp

Electronics:
1. HKS TT(sitting in room)
2. Apexi S-afc(sitting in
room)

Body:
1. Blitz front end(sitting in
room)

Fun mods:
1. "Nozzel mod"

Wanted:
1. Injectors
2. Howell rebuild kit.

The wiring is the same, i installed mine last week.

the second link in your post does not work. just thought you should know. I had not looked at that one and was looking forward to a good read :(

later bud