what are the stock injectors(size in cc's) in our cars? would 450 cc injectors from a 4g63 motor work ok in my car? if so, is there anything i should do or should not do?
later

We have 235 cc/min injectors. They are saturated injectors and swap with many domestic V8's. The 4G63 uses peak and hold injectors and thus are not a direct swap.


Corbin

'95 ESI-T
HRC+FMIC+ETC...

>what are the stock injectors(size in cc's) in our cars?

235cc which is about 22.3 lb

>would 450 cc injectors from a 4g63 motor work ok in my car?

Nope, they have peak and hold, we are saturated. If you are looking to get used injectors, check ebay for LT1 or Mustang injectors but make sure that the electical connection is the same because some are correct and some are different. The conversion number to figure out the size is (10.5). For example, 235cc divided by 10.5 = 22.3lb. 30lb injectors are 315cc and 36lb are 378cc.




________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com