Go back to previous topic
Forum namePerformance/Engine
Topic subjectJackpot! 2.4L 420a swap already been done! PICTURES
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=16435
16435, Jackpot! 2.4L 420a swap already been done! PICTURES
Posted by Niclipse, Mar-05-02 05:37 AM


go there and scroll down to "Glacius", the message with the picture of our exact motor.

stratusphere.org/cgi-bin/ib3/ikonboard.cgi?s=3c8518ca0158ffff;act=ST;f=1;t=1046
16436, RE: Jackpot! 2.4L 420a swap already been done! PICTURES
Posted by Thunderous_Talon, Mar-05-02 05:51 AM
all he did was swap the head off a 2.4 on to ours and switched out the cams. basically he really didnt do anything but the heads do swap no problem
16437, RE: Jackpot! 2.4L 420a swap already been done! PICTURES
Posted by babybeclipse, Mar-05-02 05:56 AM
How is that a head swap? The head on the 2.4 is reversed.
16438, RE: Jackpot! 2.4L 420a swap already been done! PICTURES
Posted by EvuLFleA, Mar-05-02 06:09 AM
Head, not block, therfore not 2.4L

He said that all he did was switch the 2.0 cams to reverse the flow so that he didn't need to change manifolds.

Nick, that Jeff does not have a 2.4 :)
16439, RE: Jackpot! 2.4L 420a swap already been done! PICTURES
Posted by Mystic511, Mar-05-02 06:15 AM
Yea.. he doesn't have a 2.4..

he's rebuilt with 10.5:1 compression pistons though. He's got a mean fast car.

heh, his polished valve cover is going to be mine someday.

(note the neuspeed bar and what it will look like on our cars.... and also the drastically overfilled coolant reservoir. lol.. jeff's funny.)
16440, RE: Jackpot! 2.4L 420a swap already been done! PICTURES
Posted by Kiku, Mar-05-02 06:39 AM
Hello! The 2.4 head and 2.0 heads are the SAME!


_________________
Vinnie Lima
kiku@asog.net
AIM: Kiku888
1997 Chrysler Sebring "Silver XTC"
I4 420a w/ HRC Stage 2.45 w/ FMIC
14.7@97 mph@6psi
Proud member of the
ASOG BoOsT JuNkIe Crew

16441, RE: Jackpot! 2.4L 420a swap already been done! PICTURES
Posted by DarkOne, Mar-05-02 06:43 AM
Damnit Vinnie.. you got to it before i could.

Glacius posts here, by the way. If you wait, i'm sure he will respond to your questions himself.
16442, RE: Jackpot! 2.4L 420a swap already been done! PICTURES
Posted by iamnotwhoiam, Mar-05-02 06:52 AM
well one thing is for sure.. if the 2.4 head bolts up to our block.. then the 2.4 block will surely bolt up to our engines head... :-)
16443, RE: Jackpot! 2.4L 420a swap already been done! PICTURES
Posted by 1TuffRS, Mar-05-02 07:01 AM
why would u just swap the head??? I thought ours was a better design .
16444, RE: Jackpot! 2.4L 420a swap already been done! PICTURES
Posted by 1TuffRS, Mar-05-02 07:02 AM
i just saw kiku's post. nevermind
16445, RE: Jackpot! 2.4L 420a swap already been done! PICTURES
Posted by EvuLFleA, Mar-05-02 07:02 AM
Its the exact same part number. Same design. Same. Period. Read Kiku's post.

Yeah it will bolt up but what about the rest of the process. I have no clue how the motor mounts are in the cloudcars.
16446, RE: Jackpot! 2.4L 420a swap already been done! PICTURES
Posted by Thunderous_Talon, Mar-05-02 07:06 AM
http://www.stratusphere.org/cgi-bin/ib3/ikonboard.cgi?s=3c8521800828ffff;act=ST;f=3;t=319

all info gathered on the 2.4liter ENGINE swap can befound there.. the semicolon may thro off the link so make sure you get it all.
16447, RE: Jackpot! 2.4L 420a swap already been done! PICTURES
Posted by DarkOne, Mar-05-02 09:08 AM
Guys, from what i know, this thing will fit EXACTLY as is with no modification.

You may have to cut some of your hodd reinforcement to clear the valve cover, but other than that...

Just take out the balance shafts..