Will 2.5 inch piping bolt directly to the stock cat or will i need to buy a new one? Thanks in advance.

Im pretty sure that if you buy a cat-back that is made for our cars then it would bolt up.

Ok thanks for the help. Maybe this should be put in the Things we've seen before section for more newbies like me.

my pacesetter one bolted right up. you wanna throw in a new gasket, and usually it comes with the system.

i would definately ask the vendor b4 buyin

Well... a 2.5" pipe and flange won't bolt up. When you buy a bolt on exhaust they actually start the pipe at 2" (stock diameter and increase out to 2.5" so buying a bolt on no problem. Making a custom one you will need the reducer down to stoick size

"The world is a dangerous place to live; not because of the people
who are evil, but because of the people who don't do anything about it." - Albert Einstein



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold 1/2, Rear disc brake conversion kit w/, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines