Go back to previous topic
Forum namePerformance/Engine
Topic subjectaxles
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=16137
16137, axles
Posted by gikki4481, Mar-01-02 11:11 AM
we pulled out the drive axles and alot of fluid came outta the drivers side one. is it tranny fluid or what
16138, RE: axles
Posted by Corbin, Mar-01-02 06:24 PM
Its tranny fluid alright. Mine dumped a good bit of fluid when I pulled the drivers axle the first couple times (AT). It didn't dump any fluid this most recent time. I think it may have something to do with how you have the car jacked up (one side or both).


Corbin

'95 ESI-T
HRC+FMIC+ETC...


16139, RE: axles
Posted by babybeclipse, Mar-02-02 02:27 AM
How bad was it to do that? I paid saten way too much to change my cv boots.
16140, RE: axles
Posted by gikki4481, Mar-06-02 06:54 AM
so if its tranny fluid where the hell do i fill it up at. i cant find any kind of fill hole. plus the liquid looked kinda dark. is it still tranny fluid
16141, RE: axles
Posted by gikki4481, Mar-02-02 06:22 AM
it wasnt hard at all to get em out. ya just need something to pry em out with like a crobar or wrench. but it only takes like 5 min. the hardest part is just gettin all the shit outta the way to get to em.
does anybody know where the resorvoir is to refill the damn fluid. i can find the damn thing.
16142, RE: axles
Posted by Kiku, Mar-06-02 07:06 AM
the rubber black plug is on the driver's side of the transmission. Towards the top. You may have to remove the splash guard on the wheel well to see it.


_________________
Vinnie Lima
kiku@asog.net
AIM: Kiku888
1997 Chrysler Sebring "Silver XTC"
I4 420a w/ HRC Stage 2.45 w/ FMIC
14.7@97 mph@6psi
Proud member of the
ASOG BoOsT JuNkIe Crew

16143, RE: axles
Posted by optimuspeterson, Mar-06-02 07:08 AM
look on the drivers side through the wheel well to the tranny. its near the top of the tranny and its a rubber plug. thats if your a manual.

so now your telling me that i'm going to have to buy for syncroshift when i pull my axels out to get my engine out. shit. i just repalced it like 3 months ago

*damnit...you beat me to it*
16144, RE: axles
Posted by Corbin, Mar-06-02 02:22 PM
my axle changing site:
http://www.houstonhardware.com/~cbehnken/axle.html
For anyone who thinks it is too hard

Corbin

'95 ESI-T
HRC+FMIC+ETC...