Ok, I got a code 43(or 42 41 I duno) anyway engine miss code, so I started to change the plugs, ig get to the last 1, and BAM! Oil was all over the plug! It was all over the threads and the electrode! so is it the little round sparkpug gaskit or the who head? I remeber the last time I changed them it had a lil oil on just the thread, so I thought it was just the sparkplug gaskit, but now its everywhere! Help ME!

may still be the spark plug gasket if it's only in the one cylinder. change it and see what happens

same thing here, been running with it for like 3 months, i went to kragen, pep boys ect., to change everything under the valve cover and they didn't have it here, so I tightened everything down and ran with it

Did you look at Corbin's write-up? Take special care to use the correct tightening sequence and at the proper torque levels (see bottom paragraph on page for further details).

http://www.houstonhardware.com/~cbehnken/vc.html



Eric Madden

Yeah, its that one spark plug gasket. I'd still recommend buying the valve cover gasket, and all four spark plug gaskets and replacing them. It's about a 30 minute job, easy to do yourself. I'd get it done for ya if you wanna install them blue HVAC's for me!

I do it for you, but we have 2 get together first. Im gana try to do it this week sometime