| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | Eaton PT Cruiser Style Lifter/Lash Adjusters | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=15674 |
15674, Eaton PT Cruiser Style Lifter/Lash Adjusters
Posted by optimuspeterson, Feb-24-02 12:40 PM
if i buy these do i have to change anything else? or can these just replace my old lifters?
|
15675, RE: Eaton PT Cruiser Style Lifter/Lash Adjusters
Posted by vegasdsmr, Feb-24-02 12:47 PM
its a good idea, but i will wait til fast420 shows up, he knows his valvetrain like tha back of his hand.......
tia
|
15676, RE: Eaton PT Cruiser Style Lifter/Lash Adjusters
Posted by Fast420A, Feb-24-02 01:16 PM
Thanks vegas ;-)
The lifters are good to replace because the new style has a large oil hole which helps to lube rockers better and reduce noise. You should also replace the rocker arms since they are the bigger problem. Due to poor design, they can break on the end that pushes the valve stem. Plus you have to take the rocker off the change the lifter so it only makes since.
________________________________________________________________________________________
current status - No 3rd Gear synchro
http://hometown.aol.com/ohshootuhh/
www.Fast420A.com
|
15677, RE: Eaton PT Cruiser Style Lifter/Lash Adjusters
Posted by optimuspeterson, Feb-24-02 01:32 PM
where would i pick up the rocker arms?
|
15678, RE: Eaton PT Cruiser Style Lifter/Lash Adjusters
Posted by Fast420A, Feb-24-02 01:33 PM
Howell has them and you can also get them at any chrysler dealership.
________________________________________________________________________________________
current status - No 3rd Gear synchro
http://hometown.aol.com/ohshootuhh/
www.Fast420A.com
|
15679, RE: Eaton PT Cruiser Style Lifter/Lash Adjusters
Posted by JasonESi_T, Feb-25-02 01:30 AM
Hey Kyle, do you have to take out the cam shafts to get at the lifters/ rockers to do this job? If not, then I take it, the job is pretty simple?
Thanks!
|
15680, RE: Eaton PT Cruiser Style Lifter/Lash Adjusters
Posted by Fast420A, Feb-25-02 01:46 AM
I actually just posted a quick how to change with the cams still in the car on one of Tim's recent posts on Sat. night. Run a search Mr. Moderator and you'll find it. ;-)
________________________________________________________________________________________
current status - No 3rd Gear synchro
http://hometown.aol.com/ohshootuhh/
www.Fast420A.com
|
15681, RE: Eaton PT Cruiser Style Lifter/Lash Adjusters
Posted by Fast420A, Feb-25-02 01:47 AM
In fact, here you go. http://www.2gnt.com/dcforum/DCForumID13/3844.html
________________________________________________________________________________________
current status - No 3rd Gear synchro
http://hometown.aol.com/ohshootuhh/
www.Fast420A.com
|
15682, RE: Eaton PT Cruiser Style Lifter/Lash Adjusters
Posted by Michael_97RS, Feb-25-02 02:58 AM
Thanks for the info Kyle.
Just curious what you guys ar epaying for the PT Rockers? I found them for $130 at http://www.blackdogmotorsports.com
"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein
Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/
Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads
To Be Installed: Ported/Polished Intake Manifold 1/2, Rear disc brake conversion kit w/, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines
| |