My friend, who is a Honda guy, has a 420A bottom end and wants to get rid of it and since we r boys he is giving it to me for $100!!! I was thinking in the future I could possibly build it up and drop it in my car and some point when I get greedy and wanna spray and/or run more boost. Usually if u wanna rebuild your motor it takes forever and u dont have a car for awhile so this sounds like a great deal. So now I can do it in small steps and take my time and still have my car.
Anything I should look for on this bottom end before I rebuild it? Since its only $100 its not biggy so I might take it apart and see if my friends and I can rebuild that bottom end ourselves. I just dont wanna waste $ on Howell kit if this bottom end is in bad condition. I want be rebuilding it for awhile but I just figured Id bring it up now. Thanks
-Dave

I'll give you double your money for it.


______________________________
current status unknown


http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Drop in K&N Filter and open airbox
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Depending on the condition of the engine - you may need to have it machined. Check to see if the piston bores still have good cross-hatching on them... if not you may need to take it to a machine shop to have it worked on. With a factory service manual and a couple of guages you can check some critial dimensions and make sure everything is in spec.

Hope this helps.