Go back to previous topic
Forum namePerformance/Engine
Topic subjectNeed help for a motor mount
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=15210
15210, Need help for a motor mount
Posted by BlueEclipseGuy, Feb-20-02 12:26 AM
I am getting my timing belt replaced and my freind (the mechanic) shows me the motor mount and and said that it is cracked. He showed it to me and it is cracked on the inside of the mount, it looked like the rubber part? He also said that it is prety expensive to replace so I am gonna ask...

1. Is is all THAT expensive.
2. Would anything bad happen if i didn't get it changed

All help is needed!
15211, RE: Need help for a motor mount
Posted by MuRiX, Feb-20-02 12:28 AM
Motor mounts are cheap. Look into prothane or energy suspension. You could fill it yourself for even less as well.

They are very important so I would look into having it fixed soon. You can drive around on a cracked motor mount as long as you take it easy.
15212, RE: Need help for a motor mount
Posted by Jen, Feb-20-02 01:19 AM
Energy Suspensions has them for under $30 shipped, don't they?

Check out the Handling/Suspension section, there have been a bunch of posts on motor mounts.

_________________________________________________________
Jen & Cody - http://dsmxtsi.freehomepage.com
-1995 Eagle Talon ESi
-1990 Eagle Talon TSi AWD
-1997 Mitsubishi Eclipse Spyder GS-T
-1991 Mitsubishi Eclipse GSX
-1991 Mitsubishi Eclipse GSX



15213, RE: Need help for a motor mount
Posted by BlueEclipseGuy, Feb-20-02 09:18 AM
What are some prices for a new motor mount?
15214, RE: Need help for a motor mount
Posted by Michael_97RS, Feb-20-02 09:36 AM
Yeah Energy Suspension are great inserts except you can't use them on a cracked motor ount, you'll have to replace the broken one first.

"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold 1/2, Rear disc brake conversion kit w/, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines
15215, RE: Need help for a motor mount
Posted by Fast420A, Feb-20-02 10:16 AM
>Yeah Energy Suspension are great inserts except you can't
>use them on a cracked motor ount, you'll have to replace the
>broken one first.

http://www.energysuspension.com/prod3.html

Not according to their website. They say you can use them with broken mounts which makes sense because of how they fill in the airspace in the stock mount.


________________________________________________________________________________________
current status - No 3rd Gear synchro


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com


15216, RE: Need help for a motor mount
Posted by Jen, Feb-20-02 09:38 AM
Like I already said! Under $30 shipped

_________________________________________________________
Jen & Cody - http://dsmxtsi.freehomepage.com
-1995 Eagle Talon ESi
-1990 Eagle Talon TSi AWD
-1997 Mitsubishi Eclipse Spyder GS-T
-1991 Mitsubishi Eclipse GSX
-1991 Mitsubishi Eclipse GSX