Im wanting everyone to let me see pics of there engine compartments so i can see if im on the right track

______________________________
current status unknown

http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Drop in K&N Filter and open airbox
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

yes i know its a tad big.. but oh well :-)

though its changed some since then.. and i have parts getting powder coated as we speak.. oh yea

1998 Eclipse GS

AEM Intake
Freedom designs strut bar
Eibach pro kit
Greddy cat back exhaust
High flow cat
APC indiglo gauges
Indiglo hvac gauges
Gen. 2 Altezzas w/ painted center
GTS Solarwing painted
APC clear side markers
PIAA superwhite lights

Stereo:
Kenwood cd player
kenwood excelon 6.5" components in doors and rear panels
diamond audio tweeters in dash
Dual 12W3 JL Audio H.O. box
kenwood ps 300 amp for subs
eclipse 4 channel amp for mids and highs
2 .5 farat monster caps and monster cable wiring

x-mas gifts that aint on yet:
Mesh grill
carbon fiber euro dash
18" katana concept 7's
Greddy header

future mods:
chrome engine kit

Lots of colorfull engines. Im tired of my black one. Do you guys just paint the tubes that are on the engine, or do you go buy new tubes already painted?


1999 Mitsubishi Eclipse GS 10th Anniversary Edition
- Weapon R1 Atom Bomb Exhaust

http://www.webphotos.com/list_photos.asp?mi=3&smi=1&a=55649

i have a turbo now but here are my old pics

hehe....here's a fuzzy one so maybe you won't be able to tell it's all stock.

eclipse racer.. no they are not painted.

some of the things u see in mine

silver hose techniques vacumm lines (they are silicone)
then just blue wire loom.. plastic that is slit so u can lay it over wires and such

everyone else has siliconetubes .. u can buy the kits cheap..

i need more 10mm so i can do my AC stuff....

im getting a few things powder coated things now so new pics soon

This is a pretty nice thread keep it comin hehe! ^_^

Stage 0

Stage 1

Stage 2

As you can see I like to take pictures of my car. ^_^
HAHA I love that picture evan, you know the one that sez
"AWD is for guys who can't launch for shit!" Haha I also believe that it's for guys who can't corner for shit and would rather let the car do it for them. ^_^

hey ryan a few questions..

what does ur strut bar connect too..

im guessing your silver parts are powder coated i have some parts going today.. i was scared to do the distributor cap?? did you powder coat that? the baking didnt hurt it???

when you got the little bracket that holds the ignition up how easy does it come off and im guessing you didnt drive the car while having it done.. i wanted to see if i could take it off and get it done but still be able to drive


hades u like that ill make you one but you cant have all them words in it.. ahah

hades showing off.. u punk

yea stock
stage 1
stage 2 haah jk..

just tell me what u want it to say and ill make ur a awd one.. cant be too long though well it can but the font will be small

Here's one...

not sure which kit looks better in the engine...


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, greddy sp exhaust, afx pulley, B&M SS, magecores & NGKs, S-AFC, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 10 degrees Frank 2 w/47trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, and free mods. To all the haters _|_ tia

>hey ryan a few questions..
>
>what does ur strut bar connect too..

I have two, but the other one isnt on in that pic. the nuespeed bar attaches to the A-Arm anchor bolt behind the strut tower. the other bar is the more typical one, u can see the mounts in the pic, heres a pic when i was NA w/ both bars:



>im guessing your silver parts are powder coated i have some
>parts going today.. i was scared to do the distributor cap??
>did you powder coat that? the baking didnt hurt it???


Dont have anything powdercoated. in the NA pic, the valve cover is painted w/ Aluminum color Engine Paint. In the turbo pic, i stripped all the paint off completely, altho it still looks painted in the pic. the coilpack (we dont have a distributor ;) )is painted w/ that same Aluminum engine paint, you cant powdercoat plastic parts.


>when you got the little bracket that holds the ignition up
>how easy does it come off and im guessing you didnt drive
>the car while having it done.. i wanted to see if i could
>take it off and get it done but still be able to drive


Sorry, i dont know what bracket your talking about :( ...the coilpack bolts directly to the valve cover

oh ok ryan thanks..
i thought that was part of the 2 piece neuspeed bar.. hmm i should of got it ahah..

oh well the paintlooks good

coilpack opps..

the part by your fusebox.. isnt that lil thingy there ur ignition controls or something?? well that lil silver piece that holds it.. right under the strut mount..

oh, the ecu bracket? you can drive w/o it, just secure the ecu with somethign so it doesnt go flying

WHEEEE!
Dan Green
99'RS

Can't you guys find something that looks a little better to sheild heat from your upper radiator hose? :)


THIS is where you should've started to be on the right track...... JK!


-Tony 98'GST
eclipzgst@charter.net

jd
"real men don't ride stick"

Hey HadesOmega,
Where did you get that catch can? I likeitalot... How much it run you?

Got the catch can from Frey Racing in Milpitas. It's made by JAZ, you can probably get it at Jegs I'm guessing. Got it for 44 bux, you should probably buy a barbed fitting for it also, cuz mine didn't come with one. Holds 1 quart so it takes a while to fill up.

Hey I got the same catch can. I got mine from summit racing for $29.99. They have different colors, mine was red.

Hades,
What's the square part of the piping running to your TB? I know you had custom piping run to your Starion I/C, but didn't have a clue what that square looking part of the pipe was for.

oh haha that, it's a volvo intercooler pipe. I don't know what those square things are for but they look like heatsinks. So it's somewhat of a mini intercooler bwahahha!