That is the good news. Well I don't really have any bad news :-)

Will you be testing them before shipping them to customers?




______________________________
current status unknown

http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Drop in K&N Filter and open airbox
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Woo-Hoo, finally I will be able to get me some cams and cam gears.
:D
Anthony Pagano
97 White RS
GReddy evo catback
AEM CAI
AFX udp
NGK plugs and wires
17 inch G-Racing Suzus
TOYO Proxes T1-S
Eibach Prokit
front strut bar
$15 Rear camber mod
Symborski shift kit

Coming Soon!:
Neuspeed Front upper strut bar
HurricaneGS short shifter
My Birthday!!

Will thier be a grind specific for forced induction? Something with low overlap?

>Will thier be a grind specific for forced induction?
>Something with low overlap?

YES

They have been tested, these are the ones with all the corrections.

Gary


>Will you be testing them before shipping them to customers?
>
>
>
>
>______________________________
>current status unknown
>
>http://hometown.aol.com/ohshootuhh/
>
>Perf:
>KYB AGX Struts
>Neuspeed Sport Springs
>5 Strut Bars (2 F/U, F/L, R/U, R/L)
>Sprint Front Camber Kit
>$15 Rear Camber Kit
>Corbin's A/F Gauge
>MSD DIS-2 Ignition System
>Some Regrind Cams that need High Compression (which I don't
>have)
>Ported Intake Manifold
>Ported Throttle Body
>Drop in K&N Filter and open airbox
>Custom 2 1/2 inch exhaust with Dual DTM Muffler
>Empty Catalytic Convertor
>Energy Suspension Motor Mount inserts
>Hurricane_GS Short Shifter
>Symborsky Shift Kit
>Clutchmasters Stage 3 Modular
>225/50/16inch Wheels and Tires
>
>
>Audio:
>Alpine CD Head Unit
>Alpine Flex4 25W X 4 for Fronts and Rears
>Alpine V-12 450W X 1 for Subs
>Infinity Reference Series 5 1/4 and 1 inch tweeter component
>systems for fronts and rears
>Blaupunkt 3 way 6x9's in the rears
>3 MTX 5000 10" 12 ohm subs running 4 ohms mono

so, i have a problem w/my camshaft, the lobe is grinded down the center. your cams wont do this, right??

see teh pic on my site under the problem link(top left)

i definately am in the market, keep us updated

Will their be a naturaly aspirated grind or nitrous grind like the Neon guys have?

If there is are FI cams, i'm sure they will have the rest of the selection available as well.

I really want some street grind or something, Im not one of the lucky ones that has a big hairdryer on my 420A