Go back to previous topic | Forum name | Performance/Engine | Topic subject | Crane Cams | Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=5&topic_id=138742 |
138742, Crane Cams Posted by scorpo86, Dec-31-69 06:00 PM
Hey guys! I can not find any information on these crane cams that came with my head part # 431MIT0004 Grind MIT-224/413 Exhaust Does anyone know anything about them? stage? purpose? I just feel like these are to much for a hahn 16g set up for street and some track but not drag. thanks!
|
138744, RE: Crane Cams Posted by DirtMegirt, Dec-31-69 06:00 PM
Have you tried contacting Crane? A few months ago I went through the same thing, and after contacting them, they sent me the spec sheet for the cams. I can only attest to what's on the cams I have, but there should be a sequence of letters and numbers "etched" towards the cam gear end of the cam that will identify the grind, and at the opposite end there will be a number "stamped" that will identify the platform they're used for.
|
138745, RE: Crane Cams Posted by scorpo86, Dec-31-69 06:00 PM
Originally posted by DirtMegirt Have you tried contacting Crane? A few months ago I went through the same thing, and after contacting them, they sent me the spec sheet for the cams. I can only attest to what's on the cams I have, but there should be a sequence of letters and numbers "etched" towards the cam gear end of the cam that will identify the grind, and at the opposite end there will be a number "stamped" that will identify the platform they're used for.
I have tried and going to try again today
| |