| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | RPMs at idle |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=137609 |
137609, RPMs at idle Posted by John99RS, Dec-22-12 06:17 PM
Just wondering what everyone's rpms are at when idle? Not sure if it matters if you're auto or manual. Mine(auto) is smooth when it's at 800 or 900 rpms, but it's been sitting at like 600/700 lately...little rough. This is only in drive, fine when in park. Any thoughts why?
I've got a fuel filter but haven't changed it yet. Already changed the IAC and cleaned the TB...also did a tune up.
|
137611, RE: RPMs at idle Posted by CODE4, Dec-22-12 07:21 PM
I idle at a clean 600, with a 6 speed Allison :p
|
137612, RE: RPMs at idle Posted by RallyEclipse98, Dec-23-12 12:45 PM
There's a guy on Tuners with the same problem. His car shook a little more violently than yours but he replaced the throttle body (he also had recently cleaned his old one) at that solved his problem.
It's been awhile since I drove my car so I don't remember the standing idle speed.
|
137616, RE: RPMs at idle Posted by bullettdsm, Dec-24-12 04:34 AM
Originally posted by RallyEclipse98 There's a guy on Tuners with the same problem. His car shook a little more violently than yours but he replaced the throttle body (he also had recently cleaned his old one) at that solved his problem.
It wasn't his TB. He changed it and it fixed his problem but it was either a sensor on the TB or he needed to clean his TB.
An she should idle around 800 depending on mods etc. Sinc eyou already cleaned your TB, maybe a tune up is in order? Possibly the IAC going bad or clogged at the pintle (but you did say you cleaned your TB, so you should have already pulled out the IAC and cleaned off the pintle and appropriate idle channel).
|
137617, RE: RPMs at idle Posted by RallyEclipse98, Dec-24-12 11:09 AM
This thread helps me too because my head gasket is leaking and the car idle's rough at times. I pulled the air intake pipe off and the tb is coated in oil so hopefully cleaning it will fix the rough idle.
|
137618, RE: RPMs at idle Posted by Rtistyk, Dec-27-12 06:44 PM
Mine idles at 900-950.
|