| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | How easy to install headers |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=13725 |
13725, How easy to install headers
Posted by ForsakenEclipse, Feb-04-02 07:29 AM
Is it easy to install headers or should you just get a shop to do it let me know...also how much would it cost to install headers, high flow cat, and catback exhaust system at shop if you bring them all of the above just to install
Let me know
Josh
|
13726, RE: How easy to install headers
Posted by run4cvr, Feb-04-02 07:44 AM
I did mine this weekend... Very easy. From start to finish about 2.5 hours. I sprayed some WD on all of the bolts the night before and they all came off easy. And i had no problems putting the new one on.
|
13727, RE: How easy to install headers
Posted by mcgyvr, Feb-04-02 07:49 AM
well depending on your skilzz, its pretty easy, just remove bolts from manifold, remove cat to header bolts remove old stuff replace with new headers, took me about 2 hours and I had no idea what i was doing at first. get lots of wd40 my bolts were pretty rusted and its a 1998
|
13728, RE: How easy to install headers
Posted by evan2, Feb-19-02 02:55 AM
i got a few cut up knuckles..
mines a 95.. most of the bolts came loose pretty easy. with just some rust eater 5 mins b4 i started.. im just buff ahha.. rightt
took me 3 hours..
was a pain though maybe just was my header..
the damn 02 sensor was the worst part.. but once you get it off the first time its simple
|