| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | .060 Overbore |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=137072 |
137072, .060 Overbore
Posted by Wes Tank, Jul-10-12 07:07 AM
Anyone ever gone 60 over? My block is already 40 over and it needs to be cleaned up to 60 since there is no 50 option for our motors. Otherwise I'm also trying to source another block soon.
Thanks.
|
137073, RE: .0060 Overbore
Posted by CODE4, Jul-10-12 07:14 AM
You mean .060 over? Because .0060 is sixty ten thousandths and not really a valid over bore spec.
|
137074, RE: .0060 Overbore
Posted by Wes Tank, Jul-10-12 07:33 AM
Changed it :P
|
137077, RE: .0060 Overbore
Posted by Fotowntalon, Jul-10-12 12:15 PM
where you just asking this on DSMTuners?
|
137079, RE: .0060 Overbore
Posted by CODE4, Jul-10-12 12:17 PM
Yes he was.
|
137106, RE: .0060 Overbore
Posted by fast420a83, Jul-11-12 01:23 PM
Don't buy a new block. Just sleeve it. http://www.bensonsmachine.com/ I think .060 over is too thin for boost in my opinion.
|
137107, RE: .0060 Overbore
Posted by fast420a83, Jul-11-12 02:15 PM
If you do decide to sleeve it. I just talked to Dan Benson and he said for $1,200 he will sleeve it to make it bulletproof... Can you say 1,000 hp? :)
|
137112, RE: .0060 Overbore
Posted by Fotowntalon, Jul-11-12 03:46 PM
I'm a distributor with darton if you want to sleeve it.
|
137129, RE: .0060 Overbore
Posted by bullettdsm, Jul-12-12 12:56 AM
.060 has been done multiple times.
|
137130, RE: .0060 Overbore
Posted by Wes Tank, Jul-12-12 05:44 AM
Originally posted by bullettdsm
.060 has been done multiple times.
Done deal.
|