| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | How to wire in fcd |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=136705 |
136705, How to wire in fcd
Posted by Red90Sev, May-04-12 06:10 PM
Hey, bought an fcd with no instructions and can't seem to find anything in the search on how to install it... I've always used a Missing Link, so I've never dealt with an electronic one before. It's a 3 wire. Black, green, and red wires. I'm assuming it must be fairly simple....
|
136712, RE: How to wire in fcd
Posted by Dstach, May-05-12 12:45 AM
The best bet is call the company who made it. They will tell you easily. If its symtech http://www.symtechlabs.com/support/docs/FCDInstall2420A.pdf
|
136713, RE: How to wire in fcd
Posted by Red90Sev, May-05-12 12:57 AM
I ordered off of eBay and didn't get any instructions and have been trying to get it through email and have no luck so far...
EDIT: they were supposed to come with instructions....
|
136714, RE: How to wire in fcd
Posted by SymTech Labs, May-05-12 12:58 AM
Our units have five wires, so it must have come from another manufacturer.
|
136715, RE: How to wire in fcd
Posted by Dstach, May-05-12 10:39 AM
I'm not sure how 3 wires would work. Maybe splice into the power feed and negative but how to you get the signal back. I would see if you can return it and just by a Symtech one. Many have used them and when it comes to that you want quality.
|
136720, RE: How to wire in fcd
Posted by Red90Sev, May-06-12 04:37 AM
Nevermind, got em. Black to black/green, gren to yellow/black, and red goes to green/yellow.
|