Hello, I'm having a hard time finding barb fittings for the Aeromotive 13109...I have a 95 and was going to keep using the rubber lines like I did on the fmu.

I also read that this fpr needs o-rings to seal properly? I have some brass barbs from the hardware store that screw into it but its a loose fit until its tigtened all the way. If you guys could point me in the right direction I'd appreciate it.

do not use regular fittings, they MUST have o-rings. they're not cheap but don't skimp on this or you'll leak fuel - not good. Fitting is -6AN o-ring male to whatever you want, hose, AN, metric, standard, etc. Find out what size your fuel hose is and search for a fitting of that size. You'll also want to cap one of the sides or bottom because most likely you'll only use 2 out of the 3 ports (-6an o-ring plug). A quick search revealed these (note: some of the results are non-oring fittings, avoid these or buy a fuel seal/oring separately). good luck

http://www.summitracing.com/search/Part-Type/AN-to-Hose-Barb-Fittings/Fitting-Attachment-1/Male-threads/Fitting-Size-1/minus-6-AN/?Ns=Rank|Asc

http://www.summitracing.com/search/Department/Fittings-Hoses/Part-Type/AN-to-Hose-Barb-Fittings/Fitting-Attachment-2/Hose-barb/Fitting-Size-1/minus-6-AN/Fitting-Attachment-1/Male-threads/?keyword=fitting

http://www.summitracing.com/search/?keyword=-6an%20o-ring&dds=1

http://www.google.com/search?hl=en&client=firefox-a&hs=MjX&rls=org.mozilla%3Aen-US%3Aofficial&biw=1366&bih=557&tbm=shop&q=fuel+-6an+o-ring+hose+fitting&oq=fuel+-6an+o-ring+hose+fitting&aq=f&aqi=&aql=&gs_sm=e&gs_upl=7610l12201l0l12269l10l10l0l8l0l0l131l231l0.2l2l0

I have the fittings, I just installed fpr for my build I went 6an ss. Pm me I will get rid of them for package and shipping.

Great, thanks for the help. Austin, pm sent!