Does anyone know the size of the crank pulley bolt, I am trying to remove the pulley and have bent the factory bolt and am also looking to get a longer one. Ace hardware gave me a bolt twice and it didn't fit.

Originally posted by zwickyj
Does anyone know the size of the crank pulley bolt, I am trying to remove the pulley and have bent the factory bolt and am also looking to get a longer one. Ace hardware gave me a bolt twice and it didn't fit.

Go to the dealer - 95% of Dodge dealers stock that bolt.

Should be about 10 bucks.

I do not know the exact size off the top of my head. Either way you need a new bolt and OEM is the way to go as far as that is concerned.

Part #6503553

M12 x 1.75 x 87.5

cost me $1.75 a couple years ago.

Stop being lazy and search the CAPS page.

Also, if you searched,

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=5&topic_id=129462&mode=full

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=5&topic_id=98588&mode=full

Originally posted by CODE4
Part #6503553 M12 x 1.75 x 87.5 cost me $1.75 a couple years ago. Stop being lazy and search the CAPS page.

Heh. So I got screwed at the dealer. Mine was like 9.XX.

Thanks for.the help I was searching just could never find the actual size. I also had never been in the caps thanks for pointing that out.

I bought a M12 x 1.75 bolt and it.doesn't thread in ? Anyone else have any ideas , I can order a stocker but I'm trying to find the size and thread for the long bolt to pull the pulley.