| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | head flow |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=133981 |
133981, head flow
Posted by stracer107, Apr-24-11 07:36 PM
I am just wondering if anyone knows what the flow capabilties of our heads are stock. Or if I should just port it?
|
133982, RE: head flow
Posted by Fotowntalon, Apr-24-11 07:47 PM
um... if you are looking for power gains then you should port it...
|
133985, RE: head flow
Posted by teklein, Apr-25-11 04:27 AM
Originally posted by stracer107
I am just wondering if anyone knows what the flow capabilties of our heads are stock. Or if I should just port it?
I am confused by your post.
Does our stock head flow well? Yes.
Will you make more power with a nice port? Yes.
:shrug
|
133993, RE: head flow
Posted by stracer107, Apr-25-11 11:22 AM
Sorry for the confusion. I should have been more clear. I am wonderig how much air our heads flow stock (cfm). I know a good port will help but just wanting to know how good they are stock I am building my bottom end then doing my head at a later date since I have an extra head.
|
134008, RE: head flow
Posted by RoninEclipse2G, Apr-27-11 04:18 PM
I have no idea what the CFM is on our heads, but gasket matching the ports and then cleaning up the rest of the chamber makes a HUGE difference on the butt dunk.
|
134012, RE: head flow
Posted by bullettdsm, Apr-28-11 02:07 PM
http://forums.neons.org/viewtopic.php?f=8&t=364947&p=3007515&hilit=stock+head+cfm#p3007515
I know its a Neon head, but this should give you an idea
|
134018, RE: head flow
Posted by stracer107, Apr-28-11 09:23 PM
Sweet man thanks. I appericate it. I was contapalting on haveing a flow test done on one of my heads to find out.
|