| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Anyone having problems with MSD DIS2 in lower rpm? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=133137 |
133137, Anyone having problems with MSD DIS2 in lower rpm?
Posted by eclipserstturbo, Feb-10-11 11:19 PM
I've had two MSD DIS 2 ignition boxes on both of my cars, 95 Talon NA and 98 Eclipse RST. For some reason, as soon as I install them on my cars, I notice that in the lower rpm range, around 1000-2000 rpm, I'm getting like a sputtering misfire. When it goes into higher rpm, the NA runs fine, but the turbo has like a random miss in boost transition. Just wondering if I'm the only one with this issue. Thanks
|
133138, RE: Anyone having problems with MSD DIS2 in lower rpm?
Posted by CODE4, Feb-11-11 03:40 AM
Does the problem not occur when you run the factory ignition? Have you isolated it solely to the MSD box? Where is it mounted?
|
133139, RE: Anyone having problems with MSD DIS2 in lower rpm?
Posted by dougie2, Feb-11-11 12:00 PM
They will do that when the air/fuel mixture is too lean.
|
133147, RE: Anyone having problems with MSD DIS2 in lower rpm?
Posted by eclipserstturbo, Feb-15-11 09:44 PM
Yes, it only does it with the msd boxes hooked up. Didn't do it before I hooked them up, and when I bypass them, no more random misfires and low end torque is restored.
They are both mounted under the drivers seat.
|
133148, RE: Anyone having problems with MSD DIS2 in lower rpm?
Posted by 420agreenvilleSC, Feb-16-11 10:07 AM
Connect ur laptop to the DIS and go into the MSD software. Reset the unit with the default 6212 ignition maps. Under folders>maps>6212
|
133149, RE: Anyone having problems with MSD DIS2 in lower rpm?
Posted by eclipserstturbo, Feb-16-11 05:16 PM
Thank you sir.
|