| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | stock sensor pinouts/wiring | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=130749 |
130749, stock sensor pinouts/wiring
Posted by streetlightning, May-29-10 01:12 AM
im looking for info on the crank sensor, TPS, VSS and IAC.
i have the plugS but wires were removed (from the crank sensor) the rest have their wires.\, and i cant seem to find a pic or a good refenece on which pin/color is Vref, ground and signal. this goes for the TPS, iac AND vSS. Thanx in advance.
i think its a newer style Cranl POS, but the pinout should be the same?
|
130750, RE: stock sensor pinouts/wiring
Posted by teklein, May-29-10 07:39 AM
Here ya go, you can download the FSM from Dino.
http://nawdu.de/files
|
130762, RE: stock sensor pinouts/wiring
Posted by streetlightning, May-30-10 02:59 AM
dam, i went thru that thing all day and while theres alot of info.. im not getting the info i need : ( or perhaps im not reading it right..? anyone?
|
130763, RE: stock sensor pinouts/wiring
Posted by streetlightning, May-30-10 01:44 PM
can some one verify this?
Crank
Pin 1: Yello 8v Refernce
Pin 2: Black /Green- ground
Pin 3: Blue whgiite: signal
VSS:
Yellow: 8v Refernce
Black /green - ground
Yellow/white tach signal
TPS
BROWN / RED- Signal
Green yellow- 5v power
cOIL:
BROWN: coil 2-4
BLack/blue Coils 1/3
Black red - 12V or ASD relay.
IAC
this one idk, shouldnt there be a power and ground? or is this just resistance based?
Green / Blue Iac pin 2
Orange/blue Iac pin 3
| |