| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Engine Weight |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=130493 |
130493, Engine Weight Posted by electrohead, May-02-10 06:35 AM
I`ve looked online without any luck and I`d like to know how much does a 420a longblock weigh. I`m looking to transport one and would like to know if I`d be able to lift one with a buddy out of my wife`s car without a problem and if it would be ok to put it in her trunk.
|
130494, RE: Engine Weight Posted by Cyexmaster, May-02-10 08:50 AM
I think you could move it with 2 people but's going to be difficult, I would recommend 3 people to do it rather "easy"...
If your worried if a car can haul it, well last night I moved mine about 100 miles from where it was getting done in my mom's Honda Fit...
So as long as it fit's you can move it..
hope this helps
|
130495, RE: Engine Weight Posted by electrohead, May-02-10 09:34 AM
How low did the Fit sag. I`m bringing the motor from New York to Georgia. I just don`t want the car looking like it has hydraulics and bottoming out.
|
130496, RE: Engine Weight Posted by Cyexmaster, May-02-10 01:16 PM
Not much, I really didn't notice some extreme change on it it did ride lower but not like it was all the way down.
|
130497, RE: Engine Weight Posted by teklein, May-02-10 05:11 PM
It will be fine in the car.
As for lifting a long block by yourself, you may need a second person. Its not bad to move it with two people on a pallet.
I think it weighs 300lbs or so IIRC.
|
130498, RE: Engine Weight Posted by bullettdsm, May-02-10 05:17 PM
On the high side of the scale. I put a full longblock with intake and exahust mani AND AC on it, into the back of my Eclipse. I lifted it up with a slightly built 18 year old kid. It took a LOT of effort for me to lift her up there (notice I said ME. The kid wasn't much help, lol). BUT it will fit in the back of your car (rear seats down and covered with blanky etc.).
I ended up taking it out with the cherry picker.
|
130501, RE: Engine Weight Posted by electrohead, May-02-10 06:59 PM
Do you think it'll fit in the trunk, or should I treat it like a small kid and put it in the back seat? :)
|
130502, RE: Engine Weight Posted by 420agreenvilleSC, May-02-10 08:35 PM
it'll ride in a trunk just fine. put something that can distribute the weight, like a piece of plywood, or something, if you don't wanna puncture any seats or pull up any carpet.
The engine is almost impossible to remove, even with a friend, out by hand. Get a hoist.
the engine, bare (no accessories), weighs 240lbs. with accessories and a pallet, figure 300lbs.
|
130549, RE: Engine Weight Posted by def_98gs, May-05-10 10:25 PM
Let me guess, you buying the motor from Mark at Overbore??
|
130552, RE: Engine Weight Posted by biggie16g, May-06-10 04:50 AM
I pulled a moror out of a talon and took it home in the hatch of my eclipse lol its possible to do with two or three people just watch your back.
|