Go back to previous topic
Forum namePerformance/Engine
Topic subjectidle problem!?!
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=12927
12927, idle problem!?!
Posted by Djinn13, Jan-25-02 09:38 AM
have a funny idle problem that has been pleging me for a while
replaced the MAP and the TPS and it did not fix it
the car idles a little above 3000 till it gets warm
then surges between 1k and about 3500....
and I seem to be missing somthing on my intake manifold
if sone one hase a clean pic of one with everything on it.
I would like to see it.. the part Im missin is whatever goes in
a tapped whole on the front drivers side of the intake about 2/3rds down...
12928, RE: idle problem!?!
Posted by randy, Jan-25-02 02:22 PM
Are you talking about the AIC? It's the one next to the tps.
12929, RE: idle problem!?!
Posted by Corbin, Jan-26-02 08:34 AM
If there's any question on what things are:


Corbin

'95 ESI-T
HRC+FMIC+ETC...


12930, RE: idle problem!?!
Posted by Djinn13, Jan-27-02 08:41 AM
thanx for the help it was the bracket whole I was curious about
found my problem, I preasurized my intake on a whim to find a vacume leake and turns out my intake manifold gaskit is shot out... aparently when I had the head reworked they didnt bother puting a new one in and it just now went to hell
thanx for the pic corbin
12931, RE: idle problem!?!
Posted by eclipse804, Jan-27-02 03:59 PM
How hard is it to get the intake manifold off the car? I wonder if I might need a new gasket also...
12932, RE: idle problem!?!
Posted by Djinn13, Jan-28-02 07:54 AM
its isnt that hard just follow the order in the service manuel
took me and a friend about 3 hours fubblying around in the cark without all the right tools...
the way we checked for a leake was easy if you want to try it first
whe just took a peace of rubber hose and ran it off a air chuck
to the pcv and put a hand over the throttle body and the other one listioned for a leak...