Go back to previous topic
Forum namePerformance/Engine
Topic subjectanyone change there acc belts how hard?? help
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=12718
12718, anyone change there acc belts how hard?? help
Posted by evan2, Jan-23-02 10:28 AM
well can anyone give me any info on this
i have no idea how or where it is.. etc..

want to do it myself if i can..
12719, RE: anyone change there acc belts how hard?? help
Posted by Grashper, Jan-23-02 11:12 AM
The power steering-A/C belt?
12720, RE: anyone change there acc belts how hard?? help
Posted by Dave_FL, Jan-23-02 11:53 AM
The outermost belt is the A/C power steering belt. Just loosen the bolt on the side of the small tensioner pulley and then adjust the bolt in the front of the pulley. The bolt in the front is on a long screw which will move the pulley in or out. You want it to go out towards the front of the car so the belt can be loosened. Then just put the new belt on and reverse the process.
12721, RE: anyone change there acc belts how hard?? help
Posted by vegasdsmr, Jan-23-02 03:18 PM
evan, read my writeup on the udp install, all the info for swappin belts is in there. probably towards the bottom. if ya have cruise control, definately read it. the alt bolts are tough to get to with cruise control.

the writeup is for the udp tho, so the belt #'s and other aspects will be slightly diff, but not by much.

tia
12722, RE: anyone change there acc belts how hard?? help
Posted by evan2, Jan-24-02 12:21 AM
ok thanks guys.. someothers imed me last night and helped also..

so thanks takimac (whoever u are) and jeff#2..

i dont have cruise .. eheh
12723, RE: anyone change there acc belts how hard?? help
Posted by Fast420A, Jan-24-02 12:30 AM
Tackimac8 is Loud Eclipse on the board. just a little FYI.


current status unknown

http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Drop in K&N Filter and open airbox
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono