| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | 420a Crank ? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=124620 |
124620, 420a Crank ?
Posted by 96mitseclipsers, Mar-15-09 01:32 PM
I got my bare block locally, didnt really pay much attention about getting the year its out of. Now its time to start buying the rest of the lower end stuff. Every website I get on is saying about out the 95 crank is different from the 96-99. so now how do i figure out which block I have? Thanks for all advice.
|
124622, RE: 420a Crank ?
Posted by bullettdsm, Mar-15-09 02:17 PM
Nope, all the same.
The main bearings on the other hand are different for 95. What year is your block?
|
124628, RE: 420a Crank ?
Posted by 96mitseclipsers, Mar-16-09 08:09 AM
Originally posted by bullettdsm
Nope, all the same. The main bearings on the other hand are different for 95. What year is your block?
I will have to contact the guy I bought it off of cause I forget.
|
124629, RE: 420a Crank ?
Posted by CODE4, Mar-16-09 08:59 AM
Just look at the main bearing seats on the block and the bedplate to see where the bearing tangs mate.
|
124645, RE: 420a Crank ?
Posted by 96mitseclipsers, Mar-16-09 10:11 PM
alright will do.. thanks..
|
124655, RE: 420a Crank ?
Posted by 96mitseclipsers, Mar-17-09 09:40 AM
I found out my block is a 95.. thanks for the help everyone.
|
124656, RE: 420a Crank ?
Posted by idrivetalon, Mar-17-09 02:49 PM
make sure you specify its a 95 when you get the bearings
|
124742, RE: 420a Crank ?
Posted by 96mitseclipsers, Mar-23-09 12:32 PM
Originally posted by idrivetalon
make sure you specify its a 95 when you get the bearings
I will thanks
|