| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Here's a video of my problem can someone help me out |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=124021 |
124021, Here's a video of my problem can someone help me out
Posted by 99eclipseg, Feb-12-09 04:59 PM
|
124022, RE: Here's a video of my problem can someone help me out
Posted by teklein, Feb-12-09 05:19 PM
Sounds like one of your pulleys.
Im guessing AC compressor.
Doesnt sound internal to me, but I could be wrong.
|
124023, RE: Here's a video of my problem can someone help me out
Posted by 1slw97, Feb-12-09 05:23 PM
start buy pulling the A/C and P/S belt off and go from there.
Start it up and see if the sound is still there..
|
124047, RE: Here's a video of my problem can someone help me out
Posted by John99RS, Feb-14-09 05:19 PM
I had a similar sound as yours a couple months ago. I pulled the power steering/ac belt to rule out the pulleys. It ended up being the water pump pulley that was going.
|
124048, RE: Here's a video of my problem can someone help me out
Posted by scorpo86, Feb-14-09 08:01 PM
i would take off the the power steering/ac belt to see if you have that problem after. it might be your belt tenser for your ps/ac. try it.
|
124064, RE: Here's a video of my problem can someone help me out
Posted by 420agreenvilleSC, Feb-15-09 01:41 PM
I was just there a couple months ago. Tried many things.
1. removed AC/PS belt tensioner, and re-lubbed ball bearing on pulley. Still sounded.
2. Tightened up belt. Still sounded.
3. loosened up belt. sounded better but was still there.
4. Worked constantly on it loosening/tightening belt, found an equalibrium point where the sound went away. Keep messing with that you'll fix it. Patience.
If i remember right, I ended up buying a new belt and it went away. If you try the above things, buy a new cheap belt and try that. Quit spraying your belt with WD, trust me, i've been there, all it does is make it NOTT stop squeeking.
|
124065, RE: Here's a video of my problem can someone help me out
Posted by ez, Feb-15-09 01:43 PM
the other things mentioned in this thread are great, but do you have a udp that has loose allen bolts in it?
|