| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | Error Codes CEL problems | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=121983 |
121983, Error Codes CEL problems
Posted by kriot, Dec-29-08 05:35 PM
Hi All,
An old problem came back.
P0500
P0700
P0731
P0732
Last time I got these errors it was the output speed sensor. I swapped both out this time and the CEL never went away. I cleared it out using the code reader and it came back. I cleared it out again and now its gone for good, however now the car is still in "limp in" mode only with no CEL.
Any ideas?
KC
|
121984, RE: Error Codes CEL problems
Posted by teklein, Dec-29-08 05:44 PM
PCM Error Codes
|
121985, RE: Error Codes CEL problems
Posted by RoninEclipse2G, Dec-29-08 06:04 PM
unfortunately, that list only shows one of his error codes, the speed sensor which he already checked.
|
121986, RE: Error Codes CEL problems
Posted by teklein, Dec-29-08 07:02 PM
Yeah, I actually got busy and wanted to use the wiki linking Dino coded :P I got that far then was heavily distracted.
P0500 is the speedo
P0700 appears to be a generic transmission fault
P0731 appears to be a transmission gear ration fault
P0732 appears to be A/T improper 2nd gear ratio
It could be your TCU going up. According to what I just briefly read, your torque converter could be experiencing problems.
Id go get your trans checked out. Its still running fine? No slipping, squeaking, etc?
|
122988, RE: Error Codes CEL problems
Posted by kriot, Dec-31-08 11:32 AM
Yah, the transmission wasnt slipping or anything it was kinda just like the last time. I was driving and poof, the light went on and i was limping.
Should i take it to satan or a normal shop?
I live in San Diego and seems like Satan is especially ruthless here.
KC
|
122989, RE: Error Codes CEL problems
Posted by teklein, Dec-31-08 11:44 AM
I would start with a normal transmission shop.
| |