| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | motor mount inserts | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=12096 |
12096, motor mount inserts Posted by slacker911, Jan-14-02 01:52 PM
I found a place that says they are 17$ but does not say whitch they replace or if it is one or more inserts any advice or site to get them at?
|
12097, RE: motor mount inserts Posted by 99GS, Jan-14-02 01:58 PM
http://store.summitracing.com/default.asp?target=%2Fsearch%2Easp%3Fpage%3D4%26type%3Dbykeyword%26part%3Declipse%26searchtype%3Dboth
4th item down :)

Eric Madden
|
12098, RE: motor mount inserts Posted by joshacu, Jan-14-02 02:24 PM
you can get then from road race (http://www.roadraceengineering.com/eclsuspension.htm) very bottom of the page, $23. they are inserts that fit into you stock mounts. there are a total of 6 pieces, 4 insert for both sides of the front and rear motor mounts (pretty much the only ones you need to stop the engine from torqueing), and 2 washers that go on either side of the front mount. they are a cheap and good mod, but they are kind of hard to get in there. if you have any other questions just ask.

weapon-r intake greddy headers apex-i n1 catback afx udp energy suspension motor mounts cf altezza tail lights bored t/b
|
12099, RE: motor mount inserts Posted by Super20G, Jan-14-02 03:47 PM
I deffinately need some new motor mounts, i have heard some people say they are too stiff, I have problems with rattles anyhow, I dont really wont it to me 10x worst, that and that fuel pump would drive me crazy... any a little softer but better than stock? I dont hop around now, so i havent been too worried, good response still..
|
12100, RE: motor mount inserts Posted by slacker911, Jan-15-02 02:54 AM
did you notice any diffrience I hop alittle every now and then manly when trying to chirp into 2nd.
|
12101, GET THE MOTOR MOUNT INSERTS .. . . Posted by Fast420A, Jan-15-02 03:01 AM
That was the BEST $20 I spent on my car. WELL worth it. I don't even notice the extra vibration anymore. I did notice it for about 1 week if even that long.
current status unknown
 http://hometown.aol.com/ohshootuhh/
Perf: KYB AGX Struts Neuspeed Sport Springs 5 Strut Bars (2 F/U, F/L, R/U, R/L) Sprint Front Camber Kit $15 Rear Camber Kit Corbin's A/F Gauge MSD DIS-2 Ignition System Some Regrind Cams that need High Compression (which I don't have) Ported Intake Manifold Ported Throttle Body Drop in K&N Filter and open airbox Custom 2 1/2 inch exhaust with Dual DTM Muffler Empty Catalytic Convertor Energy Suspension Motor Mount inserts Hurricane_GS Short Shifter Symborsky Shift Kit Clutchmasters Stage 3 Modular 225/50/16inch Wheels and Tires
Audio: Alpine CD Head Unit Alpine Flex4 25W X 4 for Fronts and Rears Alpine V-12 450W X 1 for Subs Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears Blaupunkt 3 way 6x9's in the rears 3 MTX 5000 10" 12 ohm subs running 4 ohms mono
| |