Hey if anyone has any knowledge on these 95 MT ecu's can you tell me if these two part numbers are interchangeable.

P5269656 manufacturing date on or after 6/16/94
P5269730 manufacturing date on or before 6/15/94

If anyone has any info on if this will work out on my car please let me know.

Sure - where did these part numbers come from? They don't match up with anything I have here.

the 5269656 is right off my ecu. Which is a 95 mitsubishi eclipse n/t rs.

the 5269730 is off a 95 eagle talon esi.

the second number is the one the guy told me he had. It also matches the numbers on this site https://www.ecudirect.com/shoppingcart/submitorder.asp?type1=

Odd. I don't see them here.

http://www.2gnt.com/nuke/modules.php?name=Part_Number_Lookup&op=display&pnc=82522

There is no reason i can think of that it *WOULDN'T* work, i'm just mystified that the part number you have were not in my verison of CAPS. So strange... perhaps those are part numbers that were superceded and dropped before this version came out.

Hell, try it. I don't think there is anyone here that will be able to tell you irrefutably that it will work..

I personally own three 95 ECUs with the P5269730 part number.

Chrysler S/N T-E-H040516186 (remove the dashes)
MMC ID P5269730
Build date 2/1995 (This was my original ECU)

Chrysler S/N T-E-H109571243
MMC ID P5269730
Manufactured after 6/16/94 (Junkyard)

Chrysler S/N T-E-H050517977
MMC ID P5269730
Manufactured after 6/16/94 (Junkyard)

They all work on my 1995 MTX Federal Talon. http://www.whack.org/~dan/ebay/ecu3.jp g

Other part numbers I believe exist for "1995 FED MTX from 6/94 on" are:
P5269656
P5269332 2/94
P5269929 7/94
P5269905 7/95-8/1/95

---------
I could only find one other ECU for sale with your part number:
FED MT PN5269656
3-4 DAYS 12-1-3
NEW $400
M and S Auto Recycling USA-CA(Rancho-Cordova)
1-800-695-4700

maybe one is for auto and one is for manual?

Originally posted by HadesOmega
maybe one is for auto and one is for manual?

Hey Guyz I have a 95 Eclipse GS and I think the ECU has went bad in it. I found another on Ebay the part number is:
05293013AC I think that is the part number for a manual trans and mine is automatic. Do you think it will work or do I need to find another? Please reply back promptly and send the message to my email.

Thanks,
Chris

If you have an ATX, you must use an ATX ECU.

ok .now my question ...part number 5269656.is also a 1995dodge avenger part number for a ecu ...i have a 95 eagle talon .........will this bolt to mine and operate correctly? its a esi n/t standard shift?

my 95 eclipse gs mtx has

CHRY S/N the244801234
MMC ID P05013113AA



Will "ALL" computers operate cruise control?

Im attempting a swap...

Like I said above about a different question, I don't think anyone here will be able to tell you that one way or another. if the ECU has pins at those locations, then I would assume yes. if not, then no. Beyond that, I don't know.

Originally posted by woomer
ok .now my question ...part number 5269656.is also a 1995dodge avenger part number for a ecu ...i have a 95 eagle talon .........will this bolt to mine and operate correctly? its a esi n/t standard shift?

Sure. They're the same driveline.