| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | 95 eclipse 420a problems | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=116625 |
116625, 95 eclipse 420a problems Posted by iowan, Feb-19-08 04:13 AM
I would like to introduce myself... my name is brad and i live in iowa... i purchased an eclipse from a friend cause he lost his licence speeding in it... lol... i drove it for a while and parked it for the winter... come to find out my roof in my garage had a hole in it and it snowed all over my engine compartment... i tried to start it the other day and the fuel had frozen... i heated up my garage and added more fuel and got it unfrozen and it still didn't start... i checked the coil pack and it had no spark... had my gf's brother come over with his testing equip... we were only getting 20lbs of fuel to the fail and the injectors were not firing and the coil pack wasn't producing spark... the wires that run to the coil pack, two of them had been exposed and i think got corroded... and then we connect the ecu reader and were able to see a few things on the comp like throttle position and what not but it wasn't reading everything... any help at all would be greatly appreciated... i was refered here by a friend on another forum... i would like to get a wiring diagram if anybody has one also... much appreciated...
|
116626, RE: 95 eclipse 420a problems Posted by DR1665, Feb-19-08 04:22 AM
We've got an ECU pinout in the wiki on the home page. Log in there with the same credentials you use to get onto this forum, then search for "ECU" and you should find it. Once you've got the pinout, you'll be able to backprobe a couple sensors to troubleshoot while cranking.
Is the CEL lit? Have you tried the keydance (also available on the wiki) to pull the codes yourself? Codes would help and I suspect that, if the car won't light off, there would be some codes.
|
116627, RE: 95 eclipse 420a problems Posted by iowan, Feb-19-08 04:32 AM
nope no codes co cel... we werent able to see much of the sensors so i want to check the wires... it was to cold to do much of anything last night ill check the diagram and test the wires... i can't member what all we could see and couldn't see... and what is the wiki... this is my first time on the forum and thanks for the help i really appreciate it
| |