Go back to previous topic
Forum namePerformance/Engine
Topic subject# of belt (a/c & p/s) without the tensor
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=115931
115931, # of belt (a/c & p/s) without the tensor
Posted by rettez, Mar-22-08 08:38 PM
hi guys, i searching the # of the belt for the ac and power steering, but without the tensor of the bracket int the a/c compressor:


so, what is the number of the belt?

the reason is that, this sensor makes off my belt when i rev up my engine! so, without this sensor, this trouble doesn't have

Thanks guys i hope you can help me :)
115932, RE: # of belt (a/c & p/s) without the tensor
Posted by RoninEclipse2G, Mar-25-08 05:51 AM
The "SEARCH" function is your friend.

2nd post in this thread should be your answer
115933, RE: # of belt (a/c & p/s) without the tensor
Posted by red96rs, Mar-28-08 04:05 PM
If im reading it right it says under the part number in that post that its not the right number, and thats for a stock belt. if thats the case, i found this post:
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=4&topic_id=90467&mode=full
its 6 down
490K5 belt.
115934, RE: # of belt (a/c & p/s) without the tensor
Posted by talonesiracing, Apr-02-08 11:10 AM
You can always take the tensioner out and do some measuring. Just wrap a string around the pulleys take it off and measure it. Your local pepboys can find a belt based on your measurements. I did it today.
115935, RE: # of belt (a/c & p/s) without the tensor
Posted by RoninEclipse2G, Apr-03-08 09:45 AM
Originally posted by red96rs
If im reading it right it says under the part number in that post that its not the right number, and thats for a stock belt. if thats the case, i found this post: http://forums.2gnt.com/dcboard.php?az=show_topic&forum=4&topic_id=90467&mode=full its 6 down 490K5 belt.


sorry, you're right. that's the size I'm using