| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | wiring for tach install on 96 eclipse... | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=115866 |
115866, wiring for tach install on 96 eclipse... Posted by vaporlock, Nov-25-02 12:13 PM
Now, before everybody goes ballistic on me here, I should letcha know up front that I've spent the past two days and prolly 8 hours trying to find a wiring diagram for a 96 na eclipse...
My car doesn't have a tach, so I bought an aftermarket one, and for the life of me I can't figure out where to clip the damn lead. Now, I'm pretty new to DSMs, so it took me 2 hours to figure out where the ECU in my car was...
however, I haven't found any one page on the web, or anywhere else, that breaks down tach instalation shotgun style.
I've tried installing it on pins 73, 6, 8... I'm not sure if I'm in the right spot though because a lot of the diagrams don't really match up to what I'm looking at...
any help (photos= teh good, I'm just a simple jarhead here folks)is much appreciated.
|
115867, RE: wiring for tach install on 96 eclipse... Posted by 96eclipse2nr, Nov-25-02 12:15 PM
your car didnt come with a tach??? i thought all eclipses did.
|
115868, RE: wiring for tach install on 96 eclipse... Posted by SILVERNT, Nov-25-02 12:31 PM
all 2g eclipses all models come with tachs, nt 5spd has 9k RPM, nt AT has 8k RPM, turbos have 9k. later chris
|
115869, RE: wiring for tach install on 96 eclipse... Posted by Memnoch6583, Nov-25-02 12:57 PM
Just fyi, NOT all 2g eclipses came with tachs. On the 95 and 96 RS's a tach was an option. In mine and a few people I know we did not have one but as far as the aftermarket tach install, the wires should be behind the black plastic cutout where the stock tach would normally be.
- Phil
|
115870, RE: wiring for tach install on 96 eclipse... Posted by widebodied, Nov-25-02 03:20 PM
to answer your question boss, the wire u need to run it is the WHITE WIRE . its around the middle of your wiring harness, just remove the cover and go to work. if ya dont know were its at, its under the hood in front of the battery, silver thing, with black cover covering wires.
and your right, most super base models eclipse didnt include a tach, common in the 95-96,
hope this helped you, now you can get some sleep :)
Dwayne H A.K.A D-low "PAID THE COST TO BE THE BOSS"
Fully built motor,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!
|
115871, RE: wiring for tach install on 96 eclipse... Posted by jsehlms, Nov-25-02 03:34 PM
Nope, wrong again!!
It was not an option on the RS, rather in 96, the only year, there was a base model below the RS, in which it DID NOT come with a tach. My friend if you have no factory tach, then you have exactly what I have, a 96 Eclipse (base model). If you do a carfax it will report 1996 Mitsubishi Eclipse. Nothing else, becasue thats all that it is. The RS's say RS the GST's say GST blah blah blah.
But, the good thing is your actually about 60 lbs lighter then that RS :-)
Jason 96 Eclipse m/t <-- Being replaced on Wed by a 95 talon tsi awd http://www.santown.com/eclipse http://www.santown.com/DSM
|
115872, RE: wiring for tach install on 96 eclipse... Posted by fauchpj, Nov-25-02 03:39 PM
yep hes right, it was only the 96. a model below the rs, can you believe that? it had steel rims no radio, no rear defroster, etc etc
|
115873, RE: wiring for tach install on 96 eclipse... Posted by 96eclipse2nr, Nov-26-02 07:31 AM
damn, and i thought i had it bad with my rs! im thankfull that mine came with the tach and radio and defrostor, thats gonna suck! i thougth when people refered to "base models" they talked about rs's. never knew there was something lower than that.
|
115874, RE: wiring for tach install on 96 eclipse... Posted by widebodied, Nov-26-02 12:42 PM
actually, hes wrong, my ex- girlfriend has a 1995 RS. It has no tachometer.
Dwayne H A.K.A D-low "PAID THE COST TO BE THE BOSS"
Fully built motor,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!
|
115875, RE: wiring for tach install on 96 eclipse... Posted by Krzykeegs, Dec-13-02 01:18 PM
Hey, I was just wondering if that worked? I've got the same car, with the same problem.
|
115876, THIS IS WHAT WORKS!!! Posted by 96NOS_Eclipse, Feb-05-03 05:38 PM
What works, order a tach (an RS or GS) from the dealer and screw it in where the tach is supposed to be. Yes it's that simple. No wiring just screw it in.
1996 Eclipse base model RIP
1997 Eclipse RS
1995 Eagle Talon TSi AWD
1989 Dodge Daytona 2.5 turbo (tinker car)
1991 Eclipse GSX
|
115877, RE: THIS IS WHAT WORKS!!! Posted by Raven457, Feb-05-03 07:33 PM
>What works, order a tach (an RS or GS) from the dealer and >screw it in where the tach is supposed to be. Yes it's that >simple. No wiring just screw it in.
This *DOES* work, I did it to my 96 Eclipse (base model, not RS). I'd suggest getting a cluster from Ebay or somewhere other than the dealer though, the dealer here in Texas quoted me $150 for the tach.
|
115878, RE: THIS IS WHAT WORKS!!! Posted by 96NOS_Eclipse, Feb-06-03 12:29 AM
Tallahasse is 126 shipped with DSM discount. Should be cheaper on ebay or if someone is selling a whole cluster, good luck.
Michelle
1997 Eclipse RS 1991 Eclipse GSX 1995 Eagle Talon TSi AWD 1989 Dodge Daytona 2.5 turbo (tinker car) 1996 Eclipse base model RIP
|
115879, RE: THIS IS WHAT WORKS!!! Posted by 96eclipse2nr, Feb-06-03 05:44 AM
well then what do yall have for the tach...those of you who have the base model?? is it just a black circle or is teh cluster different????
|
115880, RE: THIS IS WHAT WORKS!!! Posted by Raven457, Feb-06-03 07:14 AM
yeah, there's just a round black plastic piece in the cluster where the tach is supposed to be.
|
115881, RE: THIS IS WHAT WORKS!!! Posted by DarkOne, Feb-06-03 07:47 AM
welcome back Michelle. Long time no see :)
|
115882, RE: THIS IS WHAT WORKS!!! Posted by Uberingram, Feb-06-03 06:00 PM
anybody have a dash pic of this phantom cluster?
|
115883, RE: THIS IS WHAT WORKS!!! Posted by dudasd, Feb-07-03 02:18 AM
Hope your wite wire on the ECU works, mine didn't and I had to get the Autometer Tach Adapter to get it to work. Anyways, for those who are curious, here is a pic of the big black ring that us "lucky" ones have.
|
115884, RE: THIS IS WHAT WORKS!!! Posted by Uberingram, Feb-07-03 04:02 AM
wow do0d, that was quick. thx! :thumbsup
|
115885, RE: THIS IS WHAT WORKS!!! Posted by Raven457, Feb-07-03 10:09 AM
yep, that's what mine used to look like. :D
|
115886, RE: THIS IS WHAT WORKS!!! Posted by GringoEJS, Apr-09-08 01:26 AM
Damn...I have been lucky. Over the years, I have owned probably 20 Eclipses and I didn't realize there was a base beneath the RS. That instrument cluster is as bad as it gets.
|
115887, RE: THIS IS WHAT WORKS!!! Posted by foggy45, Apr-09-08 04:45 AM
wow dude thanks
![]()
| |