My Roommate and I have been Working on his Car the ENTIRE Day so far, and I seen that whoever Installed the Remote Start/Alarm before Him, had Spliced into a Few Pairs of Wires that all meet up Under the Drivers Side Door Sil. I took apart the Splices and Crimped the Pairs back down, and all of a sudden, you could hear the Fuel Pump "Charge" or whatever right away, every time. When he Taped up the Wires so we could assemble the Interior again, it wasn't Working again. Question is, does anyone know the Wire Colors for the Fuel Pump? I'm thinking either like Green/White/Silver or Brown/Red?

I dont remember off hand, but here is a schematic. Shows Black/Blue is power to the pump and all black is ground.

http://www.alldatapro.com/alldata/PRO~V99218202~C32117~R0~OB0~P2R0X~N/0/56775861/62706906/62706919/62706920/34853741/34869956/34869958/121255125/78855311/78855313

Cool.

They dont have an ECU schematic for a 1998 do they?

:P

Originally posted by teklein
Cool. They dont have an ECU schematic for a 1998 do they? :P

Alldata? You mean the actual ECU pin outs?

Also, to the OP...I didnt know what year you are working on, that schematic I looked up is for a 98'.

Originally posted by eclipse982nrRST

Originally posted by teklein Cool. They dont have an ECU schematic for a 1998 do they? :P

Alldata? You mean the actual ECU pin outs? Also, to the OP...I didnt know what year you are working on, that schematic I looked up is for a 98'.

Yeah, I need to verify a few things for the ECU. Compare it to the one in the wiki.