im getting an apexi n1 exhaust for my rs. i was wondering if the gs-t model n1 would fit on my car because i know the piping for the gs-t mufler is a little bigger than the piping for the gs model exhaust. i have a turbo and a bunch of other stuff done to my car so i was wondering if it'd bolt right on to my car with no extra mods?

It should fit. The N1 is a bit pricey compared to the Tsudo brand that is nearly (if not) identical at a cheaper cost. It should be a welcoming upgrade to your application if you are turbo'd.

yea it should bolt up just fine. i bought a knock off ebay for around 200 shipped. it is a very good quality exhaust and sounds very nice. check out my user name axeeclipse on youtube i have a sound clip of it.

yes it should fit.

niceee thanx a lot. i ordered it last thursday for $521 shipped, hopefully i get it this week. i really need it, my exhaust now is shot, big hole under the drivers side. cant wait to install it!!!! =]]

Hey I bought the Apexi World Sport Exhaust for a GST and it fit fine the main difference is where the exhaust meets the muffler section. *(removed for incorrect information)* The GSX Exhaust however WILL not Fit b/c the piping is totally different.

Originally posted by shamoo1
Hey I bought the Apexi World Sport Exhaust for a GST and it fit fine the main difference is where the exhaust meets the muffler section. On a GST the exhaust goes over the back axle and on a NT it goins under(Such a Dumb Way) So ya it will fit. The GSX Exhaust however WILL not Fit b/c the piping is totally different.

What?

That is wrong.

NT and GST goes above. Same exhaust, muffler is different.

Thats why you can BOLT ON a GST axle back to a RS/GS.

GSX however, you are correct on, it wont fit without modification.

I forgot exactly wat it was i new there was a difference there but i did this a couple of years ago. I like the GST piping better.

Originally posted by shamoo1
I forgot exactly wat it was i new there was a difference there but i did this a couple of years ago. I like the GST piping better.

There is no fucking difference!

Im telling you that NT and GST go OVER the axle. Period. Only part that is different is from the muffler to the tips.

GSX goes UNDER the axle, and is a bit shorter.

alright well right now im a bit pissed!! i got the apexi n1 for the gs-t and i have a rs turbocharged. so all the piping fits great, except for the mufler section that goes over the axle, doesnt come close enough at all to connect it to the rest of the exhaust!!! what should i do?? everyone said that the gst will bolt on just fine, but apparently its not. any suggestions??

Find out why it doesn't. "Everybody" is correct (I have had one on each of my cars). I can guess from here that you either have the wrong exhaust or your current exhaust is not a stock set-up and has been altered.

did you get rid of your stock cat? cause if you're trying to hook it directly to your headers it obviously wont be long enough....just my 2c I know it seems obvious but I have seen someone try it

yes i did connect it to the cat and it is just not fitting at all. im gunna try to get pics to show the problem. im thinking that maybe they sent me the wrong mufler section of the exhaust. but idk.

How big is the gap? If its just a few inches then you need help installin it, get someone to push the muffler forward towards the front of the car and see gap closes.

the muffler section, where it bolts to the rest of the exhaust is sitting about 4 inches above the rest of the exhaust. ill try to get a pic tomorrow of it

Originally posted by teklein

Originally posted by shamoo1 I forgot exactly wat it was i new there was a difference there but i did this a couple of years ago. I like the GST piping better.

There is no fucking difference! Im telling you that NT and GST go OVER the axle. Period. Only part that is different is from the muffler to the tips. GSX goes UNDER the axle, and is a bit shorter.

what do you guys mean "Over the axle"? From my understanding, the apexi n1 for the gst comes out in an angle due to it going under the rear cross member or "axle" how you guys call it. The gs version one might go over the cross member, but I am not sure.

So if you got the gst one it should fit pretty good, if you are having issues with it fitting, then make sure you got the right exhaust or have somebody help you put it on, like somebody else suggested earlier.

If you guys were talking about the tsudo n1, then never mind this post.

this will help clearing this up, it is a really short post, so read up...

http://www.dsmtuners.com/forums/bolt-tech/234196-question-about-gst-exhaust-apexi-n1.html

those of you who have the apexi n1 exhaust... does it go over or under your rear axle?

Originally posted by 97eclipseRS
those of you who have the apexi n1 exhaust... does it go over or under your rear axle?

Dude, your question has been answered! Read, read, read!!!!! Read my post, the answer is right there.

Originally posted by barza21

Originally posted by 97eclipseRS those of you who have the apexi n1 exhaust... does it go over or under your rear axle?

Dude, your question has been answered! Read, read, read!!!!! Read my post, the answer is right there.

Dude, dude, dude!!!! My "Apexi N-1 from E-Gay" goes over the rear ax...er crossmember. Both of them did (the NA one is gone, lol). Both were listed as GST versions.

You guys actually made me get up off my fat ass and look at mine. I knew it went over but from the conversation I had to look again, lol.

So I'm guessing that the E-Bay knock off may be different than the actual Apexi N1.

In one of Terry's posts he says that he has the 3inch apexi n1, and that it goes under the crossmember. The tsudo n1 that is sold on eBay goes over the rear crossmember. I have it, that's why I know, but the apexi doesn't (well I'm not sure about the gs one). In some websites it says that that exhaust goes under the rear crossmember (for the GST).

Originally posted by barza21
In one of Terry's posts he says that he has the 3inch apexi n1, and that it goes under the crossmember.

So? What makes Terry such an expert?

Originally posted by barza21
The tsudo n1 that is sold on eBay goes over the rear crossmember. but the apexi doesn't

And just because Tsudo doesn't equal Apexi, that doesn't make me wrong.

Yeah, I just checked my notes. I got the Tsudo (both 2 1/2" and 3") NOT the Apexi :wallbash

BUT they both have 5 letters.......

Originally posted by bullettdsm

Originally posted by barza21 In one of Terry's posts he says that he has the 3inch apexi n1, and that it goes under the crossmember.

So? What makes Terry such an expert?

Originally posted by barza21 The tsudo n1 that is sold on eBay goes over the rear crossmember. but the apexi doesn't

And just because Tsudo doesn't equal Apexi, that doesn't make me wrong. Yeah, I just checked my notes. I got the Tsudo (both 2 1/2" and 3") NOT the Apexi :wallbash BUT they both have 5 letters.......

:rolleyes

okay guys, well what happened was they sent me the wrong muffler section. got the new one and it does indeed go under the rear crossmember!!! looks and sounds amazing!!! very pleased with it. finally =]]