| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Oil pump |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=108107 |
108107, Oil pump
Posted by dj_lethrow, Mar-13-08 10:34 AM
Got the new oil pump today and I have a few questions. I got it from http://www.store.partsdinosaur.com/product1372.html
It's the D&J Rock products from parts dinosaur.com. Anybody out there use it also with good luck? Also is the oil pump sealed onto the block/bedplate with just anerobic sealant? I went to the dealer and bought new o rings for the oil pump and pick up tube because I really dont want any problems with them. Just want to hear some feedback about this oil pump and will it be alright to use.
|
108118, RE: Oil pump
Posted by dj_lethrow, Mar-14-08 05:38 AM
Any tips/advice out there about this pump? Thinking about putting it together this weekend so just looking for some reviews.
|
108120, RE: Oil pump
Posted by DarkOne, Mar-14-08 07:17 AM
It's a stock pump. not much else to say.
|
108121, RE: Oil pump
Posted by dj_lethrow, Mar-14-08 01:47 PM
Correct its a stock pump just wondering if anyone has any bad stories about this particular pump. Seems like it would work just fine, but never know.
|
108131, RE: Oil pump
Posted by techboy, Mar-16-08 10:21 AM
It'll work fine, just make sure you seal it all the way around. Look up Corbin's Buidling a 420A motor guide for idiots and there is a picture in there exactly where to apply the sealant. Good luck.
|