Ok, I needed a new oxygen sensor harness because the clip broke off. So I went to the junkyard to find one and the only one I could find is from a neon. The plug is the same, but the wire colors are all different. So what I need someone to do is to tell me which color wires go in each spot from the engine wiring harness side.

The wire colors coming from the engine harness are black/red, white/black, black/green, and black. Just tell me which numbers they match up with.

Here is a diagram of the plug.


. Clip is on top.
. _,--,_
. |1| |2|
. --------
. |3| |4|
. --------

I hope you can understand the diagram, thanks!

Originally posted by 98VengeI4
Ok, I needed a new oxygen sensor harness because the clip broke off. So I went to the junkyard to find one and the only one I could find is from a neon. The plug is the same, but the wire colors are all different. So what I need someone to do is to tell me which color wires go in each spot from the engine wiring harness side. The wire colors coming from the engine harness are black/red, white/black, black/green, and black. Just tell me which numbers they match up with. Here is a diagram of the plug. . Clip is on top. . _,--,_ . |1| |2| . -------- . |3| |4| . -------- I hope you can understand the diagram, thanks!

I need this information to get my car running again, its not starting. It's a long story but I need this help. It wont take more than 5 mins of looking at your car to check to see which colors go into which spot.

Thanks

1- Black
2- Black/Red
3- Black/Green
4- Black/White
Listed as if you were looking into the plug and the wires are coming out of the back. :thumbsup

Thanks so much man! Points to you.