| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | my engine build |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=105754 |
105754, my engine build
Posted by talonesiracing, Aug-18-07 08:45 AM
so I started my bottom end yesterday and everything was moving along great. I had all the bearings and the crank in, and I was about to install the bedplate and realized I didn't have the little o-ring that went in the one corner. Does anyone know the part number from chrysler or mitsubishi? I can't really go any further without that o-ring
|
105757, RE: my engine build
Posted by DirtMegirt, Aug-18-07 01:27 PM
6506925AA
I did my rebuild back in January and I believe that is the part # i used. Give it a go.
Edit:
I checked CAPS and used that part # at chryslerpartsdirect.com and came up with the same # as above.
|
105758, RE: my engine build
Posted by cs82685, Aug-18-07 01:33 PM
Originally posted by talonesiracing
so I started my bottom end yesterday and everything was moving along great. I had all the bearings and the crank in, and I was about to install the bedplate and realized I didn't have the little o-ring that went in the one corner. Does anyone know the part number from chrysler or mitsubishi? I can't really go any further without that o-ring
At least you realized you didn't have it. I know there have been a handful of people who put the motor all together and then remembered they forgot it.
|
105760, RE: my engine build
Posted by djtrickee, Aug-18-07 03:13 PM
Originally posted by cs82685
At least you realized you didn't have it. I know there have been a handful of people who put the motor all together and then remembered they forgot it.
Paging Dr. Iggs, Dr. Iggs to the white courtesy telephone...
|
105766, RE: my engine build
Posted by talonesiracing, Aug-19-07 06:00 AM
i've been using the 420a for BANME!s just to make sure i have all the gaskets and what not
|