I've searched for this but have found nothing. I lost those two bolts that bolt the front of the crossmember into the chassis underneath where your radiator goes.

Does anyone happen to know the size of these bolts? I went to the dealership and the bolts I ordered ended up being huge washers. I tried using a tap and die to determine the size but I can't really be sure.

Any help would be appreciated.

M12x1.25x90mm or M12x1.5x90mm. I don't know the thread pitch off hand, but they're probably 1.25.


-http://www.symtechlabs.com/-

You're the man dude, this has been driving me crazy for a week, thanks a lot!

So I went to 2 different specialty bolt shops and neither of them had M12 90mm bolts with thread pitch of 1.25 or 1.5, they only had the 1.75 thread pitch... it doesn't feel right going in but that might just be because the hole is rusty. Anyone know about this for sure?

You can just order it from Satan to rule out any possibilities...

MB176061


-http://www.symtechlabs.com/-

Just hit the junkyard and wire wheel them.