| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | Car will not start, HELP!!!! ASAP!!!!!!! | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=104353 |
104353, Car will not start, HELP!!!! ASAP!!!!!!! Posted by scorpo86, May-22-07 12:58 PM
i just rebuilt this engine and now its not starting. the engine rotates but does not start. its getting fuel and a spark but just will not turn over. if one of the cyliders is not getting gas it sould just misfire then. I DONT KNOW WHAT TO DO ANY MORE!!!! is there any other reason why it will not start, HELP PEASE!!!!!
|
104371, RE: Car will not start, HELP!!!! ASAP!!!!!!! Posted by DarkOne, May-23-07 07:18 AM
Check the cam and crank angle sensors, check that the cams are not 180* out of phase, check the timing, check the engine codes if you have a CEL.
|
104375, RE: Car will not start, HELP!!!! ASAP!!!!!!! Posted by DR1665, May-23-07 08:09 AM
Originally posted by DarkOne check that the cams are not 180* out of phase Run a compression test on the engine. If you have zero compression in all your cylinders, it's safe to say you've got a cam in 180* out. It happens. I had my intake cam in 180-out and we spent hours cussing, drinking beer, swearing, drinking more beer, verbally abusing the car, drinking even more beer, and smoking half a pack of Kamel Red Lights before we figured out what it was.
Good luck.
|
104379, RE: Car will not start, HELP!!!! ASAP!!!!!!! Posted by RoninEclipse2G, May-23-07 11:06 AM
Originally posted by DR1665Originally posted by DarkOne check that the cams are not 180* out of phase Run a compression test on the engine. If you have zero compression in all your cylinders, it's safe to say you've got a cam in 180* out. It happens. I had my intake cam in 180-out and we spent hours cussing, drinking beer, swearing, drinking more beer, verbally abusing the car, drinking even more beer, and smoking half a pack of Kamel Red Lights before we figured out what it was. Good luck.
+1, did exactly the same thing minus the cigarettes.
|
104390, RE: Car will not start, HELP!!!! ASAP!!!!!!! Posted by scorpo86, May-23-07 06:09 PM
i looked in the book and i couldnt find were the crank angle senser is. i just found the cam sen thats on the end of the cam. were is the crank angle senser
|
104391, RE: Car will not start, HELP!!!! ASAP!!!!!!! Posted by scorpo86, May-23-07 06:10 PM
and how do i check if they are bad, thanks
|
104523, RE: Car will not start, HELP!!!! ASAP!!!!!!! Posted by scorpo86, Jun-01-07 02:02 PM
thanks guys for all the help, the reason why it wasnt starting was the cam bearing were backwerds. i was drining to many beers that night and did not notice.
"CAUTION" DRINK A CASE OR BEERS WHEN WORKING ON YOUR CAR!!!! lol
|
104532, RE: Car will not start, HELP!!!! ASAP!!!!!!! Posted by djtrickee, Jun-02-07 06:33 AM
Originally posted by scorpo86 the cam bearing
???
|
104555, RE: Car will not start, HELP!!!! ASAP!!!!!!! Posted by bullettdsm, Jun-03-07 05:01 AM
Originally posted by djtrickeeOriginally posted by scorpo86 the cam gears ??? Fixed, lol.
| |