Go back to previous topic
Forum namePerformance/Engine
Topic subjectrod bearing? i have a small knock
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=103803
103803, rod bearing? i have a small knock
Posted by streetlightning, Apr-08-07 04:05 PM
ok, i hear a small knock, small as in is hard to hear, its seems to be most noticable at the pass side near the UDP. i can barely hear it in the cabin, until i hit around 3k, but even then its not easy to hear, i cn probably hear it the best when its on its rev-down. so could it be a bearing thats going bad? I added oil, and it didnt fix it. i havent tken and hard rigth turns either. so i dont kno? wouldnt it be alot louder if it was a bearing? i didnt notice any performace lost. hg good as well as psi.

96 420a 5spd
hahn stg 2 6psi
130K timing belt all that crp done at like 90k
sfmu #30's @20psi idle.
103812, RE: rod bearing? i have a small knock
Posted by VelocitaPaola, Apr-08-07 05:48 PM
Generally, the rod knock gets worse as RPMs increase or engine load increases. It sounds like you might have slight rod knock, but the symptoms are kind of ambiguous. If you remove the oil pan and tap on each of the rod caps with a hammer, one of them should sound slightly different if a bearing is spun.


-http://www.symtechlabs.com/-

103813, RE: rod bearing? i have a small knock
Posted by DarkOne, Apr-08-07 07:12 PM
Originally posted by VelocitaPaola
Generally, the rod knock gets worse as RPMs increase or engine load increases. It sounds like you might have slight rod knock, but the symptoms are kind of ambiguous. If you remove the oil pan and tap on each of the rod caps with a hammer, one of them should sound slightly different if a bearing is spun. -http://www.symtechlabs.com/-


As well as have a slightly different, darker / bluer color.
103819, RE: rod bearing? i have a small knock
Posted by 95_ESi_Person, Apr-09-07 03:53 AM
I thought I had rod knock, but it turns out I was just crazy. I replaced the old rod bearings anyway since I had already purchased new ones. The old ones came out perfectly fine.

I said "goodbye thought of rod knock, hello piston slap!"
103830, RE: rod bearing? i have a small knock
Posted by bullettdsm, Apr-09-07 10:30 AM
Paranoia will destroy us, :order
103839, RE: rod bearing? i have a small knock
Posted by cs82685, Apr-09-07 02:34 PM
Originally posted by bullettdsm
Paranoia will destroy us, :order


That's why I just turn the radio up and say "Fuck It" whenever I hear a new noise. Eventually it will come back to bite me in the ass, but until then I will follow the saying 'ignorance is bliss' I am comfortable knowing what most of my noises are though and their pretty much all suspension related as far as I remember, stupid bad bushings.

Just kidding sometimes I get paranoid. Hell it sounds like one of my wheels is gonna fall of the Evo yet I can't find anything wrong and steering feels perfect, I'm at the point of wondering if it's just normal road noise for the tires.