Does anyone here have report to give on the above item.....i'm looking to do a N/A build and am wondering if this component will work well with 10.5:1 CR and a pair of Crane 016's

Any input????

Geffen928

SEARCH!!!!!!!!!!!!!!!!!!

Most def.
The higher rev limit/advanced timing,etc.. is great for a NA buildup.

Just make sure you have upgraded valve springs,etc for the higher rev limits.. which you'd better anyways with the cams you have.

The AFX/R is a blast. It will spoil you.

1. As mentioned above, you should really have some upgraded springs/lifters with those cams, and to ensure you can make use of the higher redline.
2. This ECU is only for the 1997. If you have a 98, you will need to do some research into how/if you can make it work on your ride.
3. When I had this ECU on my 97 with 10.5:1, it was still pulling when the rev limiter kicked in. A good time.

Welcome to 2GNT. Try using the search like this:
-Search for "AFX ECU"
-Search the "Performance/Engine" forum (where this is moving)
-Search "By Subject" (not subject and message)

That should get you all the information you're looking for in about ten minutes of reading.

Cheers.