Anyone think these cams would work good w/ turbo?
I dont know much about cams, so thats why I am asking, lol.

Discuss, yes, no?

http://cgi.ebay.com/ebaymotors/95-99-DODGE-NEON-DOHC-420A-NON-TURBO-PERFORMANCE-CAMS_W0QQcmdZViewItemQQcategoryZ33614QQihZ010QQitemZ200064040066QQrdZ1

They'd probably be fine, except they're for a Neon.

Originally posted by DarkOne
They'd probably be fine, except they're for a Neon.

arent the DOHC neon heads the same? or are the intake/exhaust cams swapped, like intake up front and exhaust in the back? if thats the case, these wont work for me :(

Yeah the intake and exhaust cams are switched so they wouldn't bolt in right.

Originally posted by Slo2g
Yeah the intake and exhaust cams are switched so they wouldn't bolt in right.

that stinks.

Originally posted by eclipse982nrRST

Originally posted by Slo2g Yeah the intake and exhaust cams are switched so they wouldn't bolt in right.

that stinks.

lol.

So close, Mike. All that money you've got into that car and you're going to shopping eBay for camshafts? :nono (Then again, until we get a vendor who can deliver...) :shrug

Originally posted by DR1665
So close, Mike. All that money you've got into that car and you're going to shopping eBay for camshafts? :nono (Then again, until we get a vendor who can deliver...) :shrug

Eh, I just bought some more cams from another member.

I just found them on ebay while doing a weekly search for anything neat, and found those...

I am going with some crower 2's now, I see some people feel a difference with them actually. I had the crane 14's and didnt really like them.

Like usual though, I have something up my sleave, and I need some cams :)

What did you not like about the 14s? I am planning un using the Crane 14s in my build.

Tom

Originally posted by tbone
What did you not like about the 14s? I am planning un using the Crane 14s in my build. Tom

dont bother with them, it didnt even seem like there was a diff between the stock ones.

There's definetely a difference between stock and Crane 14 cams. I've seen a big difference in the top end, mostly while tuning VE maps. There is a considerable difference between 5000-7000 RPMs on stardard HRC stage 3 setups. But still, I think they suck too.

I haven't messed with the Crower cams at all, but the stage 2 specs look ok... good for a mid-performance street turbo setup.

Originally posted by dougie2
There's definetely a difference between stock and Crane 14 cams. I've seen a big difference in the top end, mostly while tuning VE maps. There is a considerable difference between 5000-7000 RPMs on stardard HRC stage 3 setups. But still, I think they suck too. I haven't messed with the Crower cams at all, but the stage 2 specs look ok... good for a mid-performance street turbo setup.

i have crower 2's now

Ok great, thanks for the info.

The crowers have a bit more mid rage power then?

Tom

neon cams DON'T work, the cam position sensor is completely different, go to any parts store and look at their comp cams catalog it explains in more detail

Originally posted by RoninEclipse2G
neon cams DON'T work, the cam position sensor is completely different, go to any parts store and look at their comp cams catalog it explains in more detail

Really? Woo boy, I better go tell Dino.

MB

Originally posted by RoninEclipse2G
neon cams DON'T work, the cam position sensor is completely different, go to any parts store and look at their comp cams catalog it explains in more detail

So for those of us that run without or cam position sensor, they would work fine? ;).

Originally posted by RoninEclipse2G
neon cams DON'T work, the cam position sensor is completely different, go to any parts store and look at their comp cams catalog it explains in more detail

Actually, the cam sensor is the same, it's the head and cams themselves that are different.